DIY instructions for wire hangers..

megsterpie
28
Comments

I got a few PMs about posting a how to on making the wire hangers with the names bent into them.  floydh2 made them first and inspired me to do them, she gave me some pointers that i will pass on...


i got the wire i needed at Lowe's... its 14 gauge galvanized wire (it was under $5 for 100feet and i still have left overs after making 9 hangers)


you will also need:


cutting pliers


needle nose pliers


ribbon (i tied cute bows on the top of mine)


you can get those at any craft supply store, they have the pliers for jewelry making and of course they have cute ribbons!!


a premade wire hanger


paper and pen


as for measuring the wire, for a short name like 4 letters i went with 60 inches and added 10-12 inches for each additional letter in the name (a hanger for gina would be 60 inches, one for rosie would be 70-72.. and so on)  that will be more than enough.  


i used the premade wire hanger (like the ones from the dry cleaners) as my template but added the little notches for the dress straps to fall (to make those i used the needle nose pliers to bend the wire down and then back up again in a "u" shape.  i basically laid the wire on top of the premade hanger and bent along the curve of it... mostly using my hands.


as for the letters, i printed out some pictures from etsy to see how the letters were made, and i drew out the name exactly how it would be done on the hanger.  the pictures from etsy helped alot with some more difficult letters.  just remember all letters have to be continuous.  i used the pliers a lot for this part and also a C or D battery to make the circles in the "o's" and "d's" and other letters with circles in them.  when you are making it you will see that making the name is not as hard as it looks.


After i finished the name i laid the hanger back on top of the premade one and followed the curve back up to the top and made a notch for the strap the same way i did the first one.  


i then brought the wire around the hook part (the part that hangs on the rod in the closet, idk what to call it lol)  and twisted tightly using my needle nose pliers.  cut off any excess and tied a cute little bow around it and then just played around with it to make sure all the letters were in place and voila!


 



i wish i took better pictures but if i make another one for myself i will take step by step pics and post them.  i wrapped them all already so i cant take new pics.


 


I hope this helps!! feel free to PM me with any questions : )

0
Last Updated: August 4, 2013 at 12:44 am
28
Comments
Log in or Sign up to post a comment
1375010408_small_thumb_19865d808b81b38a731e18eca3269953
1375010122_small_thumb_d1cbd8d26dc15a785868c7a11f1e82fc
1375009505_small_thumb_e9ac5cda9511e2562a9787d307fc0199
Missing_profile
1375009513_small_thumb_cf1bcd678904bec8fdba55c07192b552
Missing_profile
1375154818_small_thumb_9f2f36f8632ad582b4bc883c71a7f9d5
1375009687_small_thumb_221f26476a7fe123c511ed3d26f415b6

Find Your Wedding Vendors

Featured Vendors Near You

Chat About It