DIY Lantern Menus

2dBride
14
Comments

We had an evening reception in a venue with no windows, so we worked on all sorts of nice lighting effects.  Here is the latest--DIY lit-up menus.  (We had one for bar drinks, one for the layers of the cake, and one for the food.)


Materials



Equipment



  • Exacto knife

  • Bone folder

  • Microsoft Word or other program of your choice to create the menus for each side


Instructions


Sides



  1. Right click on the template image below and choose "Save image as" to save it to your hard drive.  (For anyone who is curious, all of the templates were originally created as tables in Microsoft Word, then converted to JPEG files.)


  2. Print two copies of the template onto two pieces of cardstock, selecting 8.5" x 11" as the size, and 0" for all the margins.

  3. Take each piece of printed cardstock.  Place a ruler (on the opposite side of the line from the area to be cut out, so that if your hand slips, it will not cut into the portion of the lantern that will remain) along the edge of each piece to be cut out, as shown by the black areas, below, and use the Exacto knife to cut along the lines:


  4. Take the ruler, and lay it along each of the fold lines shown as dotted lines below.  Run the sharp end of the bone folder along the ruler, to create a score for the fold, then fold along the scored line.


  5. Take the two pieces of cardstock, and use double-sided tape or glue to attach them as shown below, with the printing on the inside.  The holes you have just cut out are not shown on the picture below.



Bottom



  1. Right click on the template image below and choose "Save image as" to save it to your hard drive.


  2. Print a copy of the template onto a piece of cardstock.

  3. Take the piece of printed cardstock.  Place a ruler (on the opposite side of the line from the area to be cut out, so that if your hand slips, it will not cut into the portion of the lantern that will remain) along the edge of each piece to be cut out, as shown by the black areas, below, and use the Exacto knife to cut along the lines:


  4. Take the piece of cardstock you just cut out.  Place a ruler along the edge of each piece to be cut, as shown by the black lines, below, and use the Exacto knife to cut along the lines.  Place a ruler along the edge of each fold line, as shown by the dotted lines, below, and use the bone folder to score it for folding.


  5. Once you have folded it as indicated, you will have a tab sticking out at each corner.  Using double-sided tape or glue, attach that tab to the inside of the next side, forming a small, shallow box.

  6. Run a line of glue or double-sided tape around the outside of the little box.  Then fit the box into the bottom of the lantern.


Menus



  1. Open up a new document in Microsoft Word.  Click on File, then Page Setup.  Choose the following margins:  Top 1", Bottom 2.5", left 1.5", right 2.5", gutter 0".  Change Orientation to "Landscape."

  2. Click on Layout, and change the Header and Footer to 0".  Click on OK.

  3. Click on Format, then Columns.  Choose 2 columns.  Uncheck the box for "Equal width."  Then choose 2" for Column 1 width, 3" for column 1 spacing, and 2" for Column 2 width. Select the box for "Line between."  Click on OK.

  4. Create whatever text or design you want for two of the menu panes in the two columns, and print on a sheet of parchment paper.  You should now have a document that looks like this:





  5. Put a ruler on the line between the two columns, and cut along it using the Exacto knife.  This will create the menus for two of the four sides of the lantern.

  6. Use either the same menus or different ones for the other two sides, following the same format as you used for the first two.

  7. Check to make sure that each menu will fit behind the open space for it in the menu, and can be centered.  If not, trim as necessary using the Exacto knife.

  8. Glue each menu inside one of the openings in the lantern.  The bottom of the menu will be folded, and then glued to the bottom of the lantern.

  9. Take a Westinghouse Stick-Up Bulb.  Put batteries into it.  Pull the string to turn on the bulb. Set the bulb with the base down on the bottom of the lantern


Top



  1. Right click on the template image below and choose "Save image as" to save it to your hard drive.  (This is identical to the template used for the bottom, except that the center square is slightly larger, so that it will fit around the top instead of inside it.)


  2. Print a copy of the template onto a piece of cardstock.

  3. Cut and fold the cardstock, and tape the corners, exactly the same way as you did for the bottom.  However, the top will not be taped to the lantern, but simply placed on top, so you will still be able to remove it and get to the bulb inside.


Here is the lantern before the light is added:



And here it is lit up:


0
Last Updated: August 4, 2013 at 1:24 am
14
Comments
Log in or Sign up to post a comment
1375010869 small thumb f3dff13b432bf690aa871ec42518fbb2
1375010203 small thumb eb94e8ebd0322ae455e7a731d5be5af6
1375009681 small thumb c9509c503506f108021eb4c1d5678748
1375010629 small thumb bacd215c6e60b87475876655922836d6
1375009681 small thumb c9509c503506f108021eb4c1d5678748
1375010931 small thumb cd1fbd4a2129b9b646565c43b19744b9
1375009524 small thumb 4efe5608f7662650a1dbd948c3870159
1375010220 small thumb 9d3aa7fc632a30378c942ec5365e1379
1375154861 small thumb 340eac6c93773bb18ee759e2796f3ffd
1375154950 small thumb f41e1095613f8cb0f976478333f36d75
Other ideas in My Project Wedding Board by 2dBride
No image idea No image idea No image idea 1375589600 thumb 3f63cc1e2aa86a9f12272bdc99371eee s No image idea No image idea

Find Your Wedding Vendors

Featured Vendors Near You

Chat About It