SHOW FILTERS
17

Ceremony Decor Wedding Ideas

  • By Victoria Hudgins

      Bidding a nod to tradition and family, having heritage photos at your wedding can be a beautiful statement.     Here is a simple and pretty way to display them for a table top/reception accent piece.     Materials: Craft Letters Mod Podge Paintbrush Enlarged copies of family photos  X-acto Knife

      Step One Purchase craft letters from a local craft store to spell out LOVE, your initials, or another meaningful phrase.     Step Two Gather family photos and have enlarged copies made of them (to preserve the actual photos). Don't be worried if the prints are not 100% quality, the aged look is appealing for this project. Old family wedding photos are nice to use. You may also choose to use photographs of a loved one who has passed, as a way to honor them and pay tribute.     Step Three Position the photos on the letters so that faces and important features are visible, then turn over and adhere using mod podge. Be sure to use hard pressure when applying to press out any air bubbles that form.     Step Four Once dry, turn the letters over again and use an x-acto knife to trim the edges.     Display Tip Place at the head table, escort card table or by your cake for a beautiful presentation of family and love.     Photos by Pictilio
    6
  • Photos By: Chelsea Fuss

    These sweet and wild green wreaths are perfect for anytime of year (just change out the ribbon to suit the season). They look gorgeous on church doors, bride and groom chairs, or as pew markers. Total cost: $5 per wreath.     Materials: Spool wire Floral tape Clippers Greens (about 15 stems per wreath, we used rosemary, bay and boxwood) Ribbon      1. Form a circle (whatever size you need. Remember your wreath will be slightly bigger than the form) with the spool wire and double it over several times.   2. Cover the circle in floral tape.     3. Cut small pieces of greens and, take excess leaves off about an inch of the bottom stem.     4. Secure each piece with wire.     5. Make sure you overlap the stems to cover any wires or mechanics. You may need to fill in with a few extra pieces.     6. You can make these up to a week ahead of time. Spray daily with water and keep in a cool, dark place.   7. Hang with ribbon and afterwards send them home with special guests.       Add this natural touch to your big day - and have fun!     Photos By: Chelsea Fuss
    12
  •  

    By Project Wedding for our sponsor, Ann's Bridal Bargains       Add the perfect finishing touches throughout your wedding with ribbon. All you need are a few accent ideas and a little imagination!   Tie different colors of chiffon ribbon in a knot around a favor box to create a finished look and a secure spot for favor cards. Concept by Ann's Bridal Bargains.     Attach multi-colored satin and chiffon ribbons to the end of a wooden craft stick to create simple, affordable ribbon wands! Concept byAnn's Bridal Bargains.     Pink paper lanterns become adorable pieces of chair décor when hung with bright purple satin ribbon. Concept by Ann's Bridal Bargains.     Get creative with your invitation! We cut two slits, one on each side of the initial, to allow the threading of a large, brown satin ribbon. Concept by Ann's Bridal Bargains.     Ecru satin ribbon shines against mocha, two-piece favor boxes, lending a little extra luster to each favor. Concept by Ann's Bridal Bargains.     Enhance the look of a wedding program by wrapping a brown satin ribbon around the fold and finishing it with a knot and tassel. Concept by Ann's Bridal Bargains.     Satin bows can help tie your wedding colors to your wedding favors for a completely coordinated look. Concept by Ann's Bridal Bargains.     A red ribbon accents this invitation’s heart design for a cute, romantic look. Concept byAnn's Bridal Bargains.     For easy chair décor, dangle satin ribbons! They add the perfect amount of color to a ceremony or reception. Concept by Ann's Bridal Bargains.     Create texture and elegance with a ribbon and feather centerpiece! Concept by Ann's Bridal Bargains.     Two satin ribbons, secured by a favor label, create a stylish closure for these clear favor bags. Concept by Ann's Bridal Bargains.        
    25
  • One of the trends we love about rustic weddings is the do-it-yourself projects even the least crafty brides create with wood. Here's what to display for every part of your big day: 

    Ceremony

    Photo by JK Photography

    Seating Arrangements

    Photo by Stacey Kokes Photography

    Reception

    \

    Photo by Twin Hearts Photography

    Chair Decor 

    Photo by Athena Pelton Photography

     

    39
  • Photos By: Jordan Ferney

    Materials: 2 feet of 18" Russian Veiling Comb Thread and Needle Ruler Scissors  

    Important Note: There are two sides of the veiling: finished and unfinished. You want the finished end to run across your face NOT the unfinished side.

    Starting at point A start sewing in and out of the diamond shapes to gather the fabric. You'll continue sewing in and out on all sides until you get to point B.     Sew it to a hair comb.     After you attach it in your hair on the side of your head with bobby pins, then add an embellishment like a flower or feather to cover the comb.     Birdcage veils are made out of Russian Netting or Russian Veiling which is a millinery material. You can usually find it at a really good fabric store or online.     The veiling usually comes in three lengths 9" 12" and 18".     Isn't she gorgeous! If you just want a little coverage over your hair you want 9".     If you want it to cover your eyes, you'll want 12" and if you want it to cover your nose or chin you'll want the 18" veiling (cut it down to 16" to cover the nose.)     It comes in almost every color and you can also find veiling with chenille dots or pearls if you wanted to add embellishment in that way.     Inspired by precious birdcages everywhere! Enjoy!

     

     

    12
  • Photos By: Victoria Hudgins

      Looking for a way to add splashes of color to walls, doors, and chairs? These fringe tissue wreaths are just the thing; they'd also make a pretty and inexpensive backdrop.     Easy to make, an entire batch can be created in one evening. They are bright, colorful and easy on the eyes. Depending on what you'll be using them for, make them in large or small sizes.     Materials: Tissue Paper Floral Wire Scissors Needle and Thread or Sewing Machine Hot Glue Gun     Step One: Start with a length of 6 tissue papers stacked together. For medium sized wreaths, simply cut down the horizontal length of a stack of tissue paper. Split the lengths into two piles, shiny side down. To make miniature wreaths, cut that length in half. To make an extra large wreath, connect tissue lengths together with glue or thread.     Step Two: Glue a length of floral wire down the center of the stack and combine your two stacks together. This wire gives the wreaths the weight they need to take shape.     Step Three: Begin sewing the tissue stack together. Note: A sewing machine makes this project go much quicker! If you don't have one, it works fine to hand stitch the pieces together. Do a zigzag stitch directly down the center, over the floral wire.     Step Four: Cut in from both sides of the tissue towards the center of the stack. Cut in about 1/4 inch intervals down the length of the tissue.     Step Five: Separate the fringe and shape into form. A wreath looks lovely, you could also make a heart or other shape, as you like.     Display Idea: Hang the wreaths from a stand or hook, like shown here.     Display Idea: To hang from a wall, attach a length of fishing line around the top of the wreath.     Display Idea: Make miniatures to string around favor boxes!      
    0
  • Project By: Victoria Hudgins

    Photography By: Pictilio   This 3-D heart bunting is pretty and a great project to incorporate some handmade charm into your wedding. Hang between rows of seats, behind a dessert table, vertically to stage the ceremony, or around the head table as accent décor.     For a bunting of good length, purchase a heart punch from your local craft store. The small investment (about $10) will save your wrists from cutting hundreds of hearts out! You will also need colored craft paper, glue, and string.     Stamp out hearts for the length of your bunting. Each section of the bunting will use two hearts.     Once the hearts are punched, cut a length of thin string and begin gluing on the hearts. Lay one heart down (backside up). Center a small line of glue, then quickly layer the string on top and another heart (backside down). Measure a few inches and continue the process.     Once all the hearts are laid and dried, fold the top and bottom hearts away from one another for a pretty 3D effect.     Run the lengths of garland around cardboard dividers and tape in place as you go. This will make it easier to transport without getting tangled.  
    35
  •  

    Project By: Victoria Hudgins Photos By: Prokopets Studios   Want to leave your ceremony in style? There is no better way to do it then under a canopy of flying confetti! Here is a fun way to present the confetti to your guests; be ready for a colorful shower of love!     Materials: Vellum paper, scissors, a small hole punch, embroidery thread, a needle and a stack of scrapbook paper in your color palette     Step One: The first step is to make the confetti, which is the easiest part but also the most time consuming. I would suggest tackling 20 sheets or so each day over a week. More than that and your hands will get VERY tired. To make the confetti, simply punch holes out of the paper, easy peasy!     Step Two: Next, cut the hearts from your vellum; you will need to cut double the number of confetti packs you hope to make.     Step Three: Once everything is cut, lay the hearts out and top every other one with a handful of confetti. Top the bottom half with another vellum heart.     Step Four: Hold one end of the heart and starting at the bottom, begin hand sewing around the other side with embroidery thread. Make about 7 stitches around. Do not sew these too tight and leave a decent length of thread at the bottom of each heart. Tie once at the bottom, in a lose knot. The idea is to keep the confetti in but to allow your guests to easily pull the thread right out.     Lay out your hearts with a note of instruction for guests to pull the thread and throw up their hearts when it is time. A beautiful shower of bright confetti and iridescent hearts awaits your finale.     Tip: Be sure to check with your venue before planning this project- not all venues allow you to throw confetti or rice. Happy hole punching!    

     

    0
  • Project By: Victoria Hudgins

    Photos By: Carly Taylor   Making a large expanse of wall connect with your wedding can be a hard task when working on a budget. Putting simple flowers up in an artistic array is the perfect solution.     This installation would be lovely behind a dessert bar, backing a ceremony, or on any wall where you'd like to add a bit of texture and style.     To create the floral wall you will need: A selection of florals that coordinate well with our day. Since you will only be using single stems, you could buy these on your own as a great way to save money.     You'll also need embroidery hoops, which are a cheap purchase at your local craft store, mine are each 10 inches, and tulle in a soft color to add texture and depth.     First, detach your embroidery hoop into two pieces and lay a piece of tulle over the bottom hoop.     The tulle needs to be cut about two inches larger than your hoop.  

    Arrange a few blooms in a pattern you find pleasing on the bottom tulle. It helps at this step to do your entire arrangement at once, giving you a chance to see how each small piece combines to make one beautiful artistic design.

    Once your blooms are in place, cover with a second layer of tulle, then place the inside hoop back into the piece. Doing this will pull your tulle taut. Secure by screwing the embroidery key until it is tight.

    Your flowers will stay perfect floating between the tight layers of tulle.

    Hang along your wall in whichever way your venue will allow.

    4
  • Project and Photos By: Jennifer Kirk 

      Instructions for creating a unique topiary style décor.     Materials: Wood veneer edging Small cup hooks Wood glue Hot glue gun Small brick of green dry floral foam Boxwood and flower cuttings Fishing line or string C-clamp Binder clips (x3-4) Ruler Scissors Power drill with thin drill bit   Step One: From the roll of veneer edging, cut out five strips that are the same size. For the small pendant, the strips were 17.5" inches long. The larger pendant is made out of strips 21" long.     Step Two: Dab a small amount of wood glue onto the very end of one of the wood strips. Connect the ends together (about 1/2 an inch) of one of the wood strips, forming a loop. Hold together with a binder clip as the glue dries. Repeat with two more wood strips (do not loop the fourth and fifth strips) for a total of three loops.     Step Three: After the glue has dried (ours was a fast-dry formula that took about 15 minutes), remove binder clips. Nest one loop inside another, forming a wide, 45 degree angle 'X' when viewing from above. Glue together at the top.     Step Four: Next, dab some glue at the top of the 'X' then nest inside the third loop, this one going across the 'X' and down the middle.     Step Five: Clamp together with a C-clamp and let dry for 15-20 minutes.     Step Six: When the glue has set, remove C-clamp. Thread the fourth wood strip through the sphere and glue ends together to form a loop inside that is flush against the other loops. Use a binder clip to hold the loop together as the glue dries.     Step Seven: Remove the binder clip after the glue has set. Hold the sphere so that the outer loops run longitudinal and the side of the sphere faces you. Position the innermost loop you had just formed in step 6 at a 45 degree angle. This innermost loop crosses with one of the longitudinal loops facing you. Glue together at the center spot where they meet.     Step Eight: Repeat step 6, threading in the last wood strip, forming a loop, gluing, then positioning in a -45 degree angle and gluing where it crosses the other loops. Clamp or use binder clips to hold while drying.     Step Nine: Remove clips. With a power drill, drill a small hole at the very top of the sphere.     Step Ten: Twist in a small cup hook into the hold. This hook will be for hanging the pendant.     Step Eleven: Carefully pull aside the loops (an area where they are not glued together) just wide enough to insert a small brick of dry floral foam. With hot glue, secure the foam to the inside bottom of the pendant.     Step Twelve: Thread boxwood cuttings though the openings of the pendant and push ends into the foam. Weave longer cuttings around the foam to conceal it. Add some color and texture with small flowers and various types of greenery, and artfully arrange some pieces to drape out of the sphere.     Step Thirteen: When finished adding plant cuttings, hang pendants with string or fishing line.    
    7
  • By Victoria Hudgins

      Bidding a nod to tradition and family, having heritage photos at your wedding can be a beautiful statement.     Here is a simple and pretty way to display them for a table top/reception accent piece.     Materials: Craft Letters Mod Podge Paintbrush Enlarged copies of family photos  X-acto Knife

      Step One Purchase craft letters from a local craft store to spell out LOVE, your initials, or another meaningful phrase.     Step Two Gather family photos and have enlarged copies made of them (to preserve the actual photos). Don't be worried if the prints are not 100% quality, the aged look is appealing for this project. Old family wedding photos are nice to use. You may also choose to use photographs of a loved one who has passed, as a way to honor them and pay tribute.     Step Three Position the photos on the letters so that faces and important features are visible, then turn over and adhere using mod podge. Be sure to use hard pressure when applying to press out any air bubbles that form.     Step Four Once dry, turn the letters over again and use an x-acto knife to trim the edges.     Display Tip Place at the head table, escort card table or by your cake for a beautiful presentation of family and love.     Photos by Pictilio
    6
  • Photos By: Chelsea Fuss

    These sweet and wild green wreaths are perfect for anytime of year (just change out the ribbon to suit the season). They look gorgeous on church doors, bride and groom chairs, or as pew markers. Total cost: $5 per wreath.     Materials: Spool wire Floral tape Clippers Greens (about 15 stems per wreath, we used rosemary, bay and boxwood) Ribbon      1. Form a circle (whatever size you need. Remember your wreath will be slightly bigger than the form) with the spool wire and double it over several times.   2. Cover the circle in floral tape.     3. Cut small pieces of greens and, take excess leaves off about an inch of the bottom stem.     4. Secure each piece with wire.     5. Make sure you overlap the stems to cover any wires or mechanics. You may need to fill in with a few extra pieces.     6. You can make these up to a week ahead of time. Spray daily with water and keep in a cool, dark place.   7. Hang with ribbon and afterwards send them home with special guests.       Add this natural touch to your big day - and have fun!     Photos By: Chelsea Fuss
    12
  •  

    By Project Wedding for our sponsor, Ann's Bridal Bargains       Add the perfect finishing touches throughout your wedding with ribbon. All you need are a few accent ideas and a little imagination!   Tie different colors of chiffon ribbon in a knot around a favor box to create a finished look and a secure spot for favor cards. Concept by Ann's Bridal Bargains.     Attach multi-colored satin and chiffon ribbons to the end of a wooden craft stick to create simple, affordable ribbon wands! Concept byAnn's Bridal Bargains.     Pink paper lanterns become adorable pieces of chair décor when hung with bright purple satin ribbon. Concept by Ann's Bridal Bargains.     Get creative with your invitation! We cut two slits, one on each side of the initial, to allow the threading of a large, brown satin ribbon. Concept by Ann's Bridal Bargains.     Ecru satin ribbon shines against mocha, two-piece favor boxes, lending a little extra luster to each favor. Concept by Ann's Bridal Bargains.     Enhance the look of a wedding program by wrapping a brown satin ribbon around the fold and finishing it with a knot and tassel. Concept by Ann's Bridal Bargains.     Satin bows can help tie your wedding colors to your wedding favors for a completely coordinated look. Concept by Ann's Bridal Bargains.     A red ribbon accents this invitation’s heart design for a cute, romantic look. Concept byAnn's Bridal Bargains.     For easy chair décor, dangle satin ribbons! They add the perfect amount of color to a ceremony or reception. Concept by Ann's Bridal Bargains.     Create texture and elegance with a ribbon and feather centerpiece! Concept by Ann's Bridal Bargains.     Two satin ribbons, secured by a favor label, create a stylish closure for these clear favor bags. Concept by Ann's Bridal Bargains.        
    25
  • One of the trends we love about rustic weddings is the do-it-yourself projects even the least crafty brides create with wood. Here's what to display for every part of your big day: 

    Ceremony

    Photo by JK Photography

    Seating Arrangements

    Photo by Stacey Kokes Photography

    Reception

    \

    Photo by Twin Hearts Photography

    Chair Decor 

    Photo by Athena Pelton Photography

     

    39
  • Photos By: Jordan Ferney

    Materials: 2 feet of 18" Russian Veiling Comb Thread and Needle Ruler Scissors  

    Important Note: There are two sides of the veiling: finished and unfinished. You want the finished end to run across your face NOT the unfinished side.

    Starting at point A start sewing in and out of the diamond shapes to gather the fabric. You'll continue sewing in and out on all sides until you get to point B.     Sew it to a hair comb.     After you attach it in your hair on the side of your head with bobby pins, then add an embellishment like a flower or feather to cover the comb.     Birdcage veils are made out of Russian Netting or Russian Veiling which is a millinery material. You can usually find it at a really good fabric store or online.     The veiling usually comes in three lengths 9" 12" and 18".     Isn't she gorgeous! If you just want a little coverage over your hair you want 9".     If you want it to cover your eyes, you'll want 12" and if you want it to cover your nose or chin you'll want the 18" veiling (cut it down to 16" to cover the nose.)     It comes in almost every color and you can also find veiling with chenille dots or pearls if you wanted to add embellishment in that way.     Inspired by precious birdcages everywhere! Enjoy!

     

     

    12
  • Photos By: Victoria Hudgins

      Looking for a way to add splashes of color to walls, doors, and chairs? These fringe tissue wreaths are just the thing; they'd also make a pretty and inexpensive backdrop.     Easy to make, an entire batch can be created in one evening. They are bright, colorful and easy on the eyes. Depending on what you'll be using them for, make them in large or small sizes.     Materials: Tissue Paper Floral Wire Scissors Needle and Thread or Sewing Machine Hot Glue Gun     Step One: Start with a length of 6 tissue papers stacked together. For medium sized wreaths, simply cut down the horizontal length of a stack of tissue paper. Split the lengths into two piles, shiny side down. To make miniature wreaths, cut that length in half. To make an extra large wreath, connect tissue lengths together with glue or thread.     Step Two: Glue a length of floral wire down the center of the stack and combine your two stacks together. This wire gives the wreaths the weight they need to take shape.     Step Three: Begin sewing the tissue stack together. Note: A sewing machine makes this project go much quicker! If you don't have one, it works fine to hand stitch the pieces together. Do a zigzag stitch directly down the center, over the floral wire.     Step Four: Cut in from both sides of the tissue towards the center of the stack. Cut in about 1/4 inch intervals down the length of the tissue.     Step Five: Separate the fringe and shape into form. A wreath looks lovely, you could also make a heart or other shape, as you like.     Display Idea: Hang the wreaths from a stand or hook, like shown here.     Display Idea: To hang from a wall, attach a length of fishing line around the top of the wreath.     Display Idea: Make miniatures to string around favor boxes!      
    0
  • Project By: Victoria Hudgins

    Photography By: Pictilio   This 3-D heart bunting is pretty and a great project to incorporate some handmade charm into your wedding. Hang between rows of seats, behind a dessert table, vertically to stage the ceremony, or around the head table as accent décor.     For a bunting of good length, purchase a heart punch from your local craft store. The small investment (about $10) will save your wrists from cutting hundreds of hearts out! You will also need colored craft paper, glue, and string.     Stamp out hearts for the length of your bunting. Each section of the bunting will use two hearts.     Once the hearts are punched, cut a length of thin string and begin gluing on the hearts. Lay one heart down (backside up). Center a small line of glue, then quickly layer the string on top and another heart (backside down). Measure a few inches and continue the process.     Once all the hearts are laid and dried, fold the top and bottom hearts away from one another for a pretty 3D effect.     Run the lengths of garland around cardboard dividers and tape in place as you go. This will make it easier to transport without getting tangled.  
    35
  •  

    Project By: Victoria Hudgins Photos By: Prokopets Studios   Want to leave your ceremony in style? There is no better way to do it then under a canopy of flying confetti! Here is a fun way to present the confetti to your guests; be ready for a colorful shower of love!     Materials: Vellum paper, scissors, a small hole punch, embroidery thread, a needle and a stack of scrapbook paper in your color palette     Step One: The first step is to make the confetti, which is the easiest part but also the most time consuming. I would suggest tackling 20 sheets or so each day over a week. More than that and your hands will get VERY tired. To make the confetti, simply punch holes out of the paper, easy peasy!     Step Two: Next, cut the hearts from your vellum; you will need to cut double the number of confetti packs you hope to make.     Step Three: Once everything is cut, lay the hearts out and top every other one with a handful of confetti. Top the bottom half with another vellum heart.     Step Four: Hold one end of the heart and starting at the bottom, begin hand sewing around the other side with embroidery thread. Make about 7 stitches around. Do not sew these too tight and leave a decent length of thread at the bottom of each heart. Tie once at the bottom, in a lose knot. The idea is to keep the confetti in but to allow your guests to easily pull the thread right out.     Lay out your hearts with a note of instruction for guests to pull the thread and throw up their hearts when it is time. A beautiful shower of bright confetti and iridescent hearts awaits your finale.     Tip: Be sure to check with your venue before planning this project- not all venues allow you to throw confetti or rice. Happy hole punching!    

     

    0
  • Project By: Victoria Hudgins

    Photos By: Carly Taylor   Making a large expanse of wall connect with your wedding can be a hard task when working on a budget. Putting simple flowers up in an artistic array is the perfect solution.     This installation would be lovely behind a dessert bar, backing a ceremony, or on any wall where you'd like to add a bit of texture and style.     To create the floral wall you will need: A selection of florals that coordinate well with our day. Since you will only be using single stems, you could buy these on your own as a great way to save money.     You'll also need embroidery hoops, which are a cheap purchase at your local craft store, mine are each 10 inches, and tulle in a soft color to add texture and depth.     First, detach your embroidery hoop into two pieces and lay a piece of tulle over the bottom hoop.     The tulle needs to be cut about two inches larger than your hoop.  

    Arrange a few blooms in a pattern you find pleasing on the bottom tulle. It helps at this step to do your entire arrangement at once, giving you a chance to see how each small piece combines to make one beautiful artistic design.

    Once your blooms are in place, cover with a second layer of tulle, then place the inside hoop back into the piece. Doing this will pull your tulle taut. Secure by screwing the embroidery key until it is tight.

    Your flowers will stay perfect floating between the tight layers of tulle.

    Hang along your wall in whichever way your venue will allow.

    4
  • Project and Photos By: Jennifer Kirk 

      Instructions for creating a unique topiary style décor.     Materials: Wood veneer edging Small cup hooks Wood glue Hot glue gun Small brick of green dry floral foam Boxwood and flower cuttings Fishing line or string C-clamp Binder clips (x3-4) Ruler Scissors Power drill with thin drill bit   Step One: From the roll of veneer edging, cut out five strips that are the same size. For the small pendant, the strips were 17.5" inches long. The larger pendant is made out of strips 21" long.     Step Two: Dab a small amount of wood glue onto the very end of one of the wood strips. Connect the ends together (about 1/2 an inch) of one of the wood strips, forming a loop. Hold together with a binder clip as the glue dries. Repeat with two more wood strips (do not loop the fourth and fifth strips) for a total of three loops.     Step Three: After the glue has dried (ours was a fast-dry formula that took about 15 minutes), remove binder clips. Nest one loop inside another, forming a wide, 45 degree angle 'X' when viewing from above. Glue together at the top.     Step Four: Next, dab some glue at the top of the 'X' then nest inside the third loop, this one going across the 'X' and down the middle.     Step Five: Clamp together with a C-clamp and let dry for 15-20 minutes.     Step Six: When the glue has set, remove C-clamp. Thread the fourth wood strip through the sphere and glue ends together to form a loop inside that is flush against the other loops. Use a binder clip to hold the loop together as the glue dries.     Step Seven: Remove the binder clip after the glue has set. Hold the sphere so that the outer loops run longitudinal and the side of the sphere faces you. Position the innermost loop you had just formed in step 6 at a 45 degree angle. This innermost loop crosses with one of the longitudinal loops facing you. Glue together at the center spot where they meet.     Step Eight: Repeat step 6, threading in the last wood strip, forming a loop, gluing, then positioning in a -45 degree angle and gluing where it crosses the other loops. Clamp or use binder clips to hold while drying.     Step Nine: Remove clips. With a power drill, drill a small hole at the very top of the sphere.     Step Ten: Twist in a small cup hook into the hold. This hook will be for hanging the pendant.     Step Eleven: Carefully pull aside the loops (an area where they are not glued together) just wide enough to insert a small brick of dry floral foam. With hot glue, secure the foam to the inside bottom of the pendant.     Step Twelve: Thread boxwood cuttings though the openings of the pendant and push ends into the foam. Weave longer cuttings around the foam to conceal it. Add some color and texture with small flowers and various types of greenery, and artfully arrange some pieces to drape out of the sphere.     Step Thirteen: When finished adding plant cuttings, hang pendants with string or fishing line.    
    7

Get Started!

Create inspiration boards, share ideas with your friends and wedding vendors, get feedback from brides like you, and lots more!

Have a question? Contact Support

Find Your Wedding Vendors

Featured Vendors Near You

Related Photos
Related Forums
At Project Wedding we have thousands of photos to serve as inspiration for your wedding. Some of our many different photo galleries include the following: ...

Planning Basics: Find the best place to register, find the best centerpiece for your color scheme, and find the perfect thank you gifts for your bridal party – all while staying under budget – with our wedding planning tips and ideas.

DIY Wedding: With so many colorful images of unique wedding ideas we’ve found, plus all our real wedding images, you’ll find the most DIY wedding ideas here. From simple wedding favors to more complex origami wedding decorations – if we think you can make it, you’ll find it here (if it’s not here it doesn’t mean we don’t think you can make it, it just means we want you to send us a picture when your DIY project is done)!

Fashion & Beauty: Don’t forget to find wedding ideas for yourself! We have thousands of pictures of bridal hair and makeup, as well as one of the largest selections of wedding dresses for you to browse.

Wedding Venues: Not only do we have ideas for one-of-a-kind wedding venues as well as established wedding venues in your area, we have some of the very best wedding decoration ideas and wedding theme ideas for once you have nailed down the venue.

Wedding Cake: While we must admit that wedding cake is delicious (mmmm, wedding cake, nom nom nom), your cake will also serve as a focal point of the wedding reception. Check out all of our wedding ideas for cake decorations as well as cake alternatives.

Engagement Rings: Project Wedding doesn’t just start once you’ve gotten engaged. Register with us before the big question has been popped and share photos of your favorite engagement rings with your future better half.

Honeymoon: Project Wedding doesn’t stop with the wedding either. We’ve included hundreds of post-wedding ideas to inspire your perfect honeymoon!