SHOW FILTERS
90

Reception Decor Wedding Ideas

  • Photos By: Jordan Ferney

    Materials: Vellum paper, 56 sheets of paper, a sewing machine,  fishing weights (not pictured), an exacto knife and straight edge (or a stack cutter,) artist tape (for hanging)

    Cut the sheets of vellum into one inch strips. You can do this with an exacto knife or have it cut all at one time with a stack cutter. (If you decide to go the stack color route organizing the paper in the order you want it to hang in will save you some time.)Measure the height of the space where the mobiles will hang to figure out how long you want them. Keep in mind you'll want to keep the eyesight of the guests clear of any obstruction. Once you know the length of the mobiles, layout the different colors in the order you want. Repeat until it is close to the length of mobile you want. Then put it into a stack and it is ready to sew.

    Leave a 12" tail of thread at the beginning and start to sew down the middle of the first strip. (I found it is easiest to put a piece of tape on the sewing machine at the end of the strip as a guide to mark where the vellum should be sewn.) Continue feeding each addition strip into the sewing machine.

    At the end leave another long tail of string. As you are sewing, try to be consistent on the amount of space between each strip but if its not perfect its ok, this design is very forgiving. Our mobiles were about four feet and the actual sewing took about 10 minutes for each mobile.     Hang the mobiles at varying heights over the center of the table with artist tape.     If left by itself the bottom paper will curl up, add a simple fishing weight at the bottom to prevent this from happening and to add a nice polish to the project.     This bright and modern mobile project is perfect for a daytime wedding reception or shower and can be done in any color scheme. It will transform the room and make a big impact.     The best part is this whole project can be made on the cheap -- for under $25     Use your imagination - or any color palette - to go with your event theme.     Gorgeous!        
    5
  • Project By: Victoria Hudgins

    Photography By: Pictilio   This 3-D heart bunting is pretty and a great project to incorporate some handmade charm into your wedding. Hang between rows of seats, behind a dessert table, vertically to stage the ceremony, or around the head table as accent décor.     For a bunting of good length, purchase a heart punch from your local craft store. The small investment (about $10) will save your wrists from cutting hundreds of hearts out! You will also need colored craft paper, glue, and string.     Stamp out hearts for the length of your bunting. Each section of the bunting will use two hearts.     Once the hearts are punched, cut a length of thin string and begin gluing on the hearts. Lay one heart down (backside up). Center a small line of glue, then quickly layer the string on top and another heart (backside down). Measure a few inches and continue the process.     Once all the hearts are laid and dried, fold the top and bottom hearts away from one another for a pretty 3D effect.     Run the lengths of garland around cardboard dividers and tape in place as you go. This will make it easier to transport without getting tangled.  
    35
  •  

    By Project Wedding for our sponsor, Ann's Bridal Bargains       Add the perfect finishing touches throughout your wedding with ribbon. All you need are a few accent ideas and a little imagination!   Tie different colors of chiffon ribbon in a knot around a favor box to create a finished look and a secure spot for favor cards. Concept by Ann's Bridal Bargains.     Attach multi-colored satin and chiffon ribbons to the end of a wooden craft stick to create simple, affordable ribbon wands! Concept byAnn's Bridal Bargains.     Pink paper lanterns become adorable pieces of chair décor when hung with bright purple satin ribbon. Concept by Ann's Bridal Bargains.     Get creative with your invitation! We cut two slits, one on each side of the initial, to allow the threading of a large, brown satin ribbon. Concept by Ann's Bridal Bargains.     Ecru satin ribbon shines against mocha, two-piece favor boxes, lending a little extra luster to each favor. Concept by Ann's Bridal Bargains.     Enhance the look of a wedding program by wrapping a brown satin ribbon around the fold and finishing it with a knot and tassel. Concept by Ann's Bridal Bargains.     Satin bows can help tie your wedding colors to your wedding favors for a completely coordinated look. Concept by Ann's Bridal Bargains.     A red ribbon accents this invitation’s heart design for a cute, romantic look. Concept byAnn's Bridal Bargains.     For easy chair décor, dangle satin ribbons! They add the perfect amount of color to a ceremony or reception. Concept by Ann's Bridal Bargains.     Create texture and elegance with a ribbon and feather centerpiece! Concept by Ann's Bridal Bargains.     Two satin ribbons, secured by a favor label, create a stylish closure for these clear favor bags. Concept by Ann's Bridal Bargains.        
    24
  • By: Victoria Hudgins

    This DIY packaging is a fresh and modern way to present small favors to guests.         Fill each cocoon with something fun to keep your guests busy (like these bright and nostalgic finger pops) and something sweet to snack on.   Materials: 1/2 craft glue- 1/2 water mixture Large spool of embroidery thread Balloons (1 balloon for every 2 favors)   Instructions:   1. Blow up your balloons and tie a length of thread to the end of the balloon.   2. Begin wrapping thread around the balloon, the messier the wrap the better.   3. Once you have a good covering over the entire balloon, dip a brush into the glue mixture and coat the entire balloon. Hang the balloon by its end to dry. Note: You could also use liquid fabric stiffener for this step in the project, just fill a large bowl and completely dip your wrapped balloons in.     4. Once dry, cut the balloon in half at the center width. Each balloon will make two separate cocoon wraps.      5. Gently pop each balloon and pull away from the fabric. Fill your wraps and tie together with a ribbon and simple tag.     6. Rest each favor on a place setting for a creative, modern touch.  
    4
  •  

    By: Danyelle Mathews   Creating charming escort cards for your wedding doesn't have to take a lot of time or resources. Simply gather a few basic, inexpensive supplies to produce this budget-savvy, casual-chic concept.      Supplies: Manilla shipping tags Chalkboard paint Foam paintbrush   Step One Arrange your tags on a large work surface     Step Two Dip the foam paintbrush into the chalkboard paint and apply one brushstroke to each tag.     Step Three Allow the paint to dry completely, then write guests names and seating information on the tags with chalk.     Step Four Display the tags using a fabric backdrop, coordinating yarn or string and wooden clothespins.     {Photos by: Danyelle Matthews}
    11
  •  

    By: Danyelle Mathews   Creating charming escort cards for your wedding doesn't have to take a lot of time or resources. Simply gather a few basic, inexpensive supplies to produce this budget-savvy, casual-chic concept.      Supplies: Manilla shipping tags Chalkboard paint Foam paintbrush   Step One Arrange your tags on a large work surface     Step Two Dip the foam paintbrush into the chalkboard paint and apply one brushstroke to each tag.     Step Three Allow the paint to dry completely, then write guests names and seating information on the tags with chalk.     Step Four Display the tags using a fabric backdrop, coordinating yarn or string and wooden clothespins.     {Photos by: Danyelle Matthews}
    5
  • One of the trends we love about rustic weddings is the do-it-yourself projects even the least crafty brides create with wood. Here's what to display for every part of your big day: 

    Ceremony

    Photo by JK Photography

    Seating Arrangements

    Photo by Stacey Kokes Photography

    Reception

    \

    Photo by Twin Hearts Photography

    Chair Decor 

    Photo by Athena Pelton Photography

     

    38
  • Project and Photos by: Katelin Gallagher     I just love the look of a filled-to-the-brim centerpiece, but wanted to find a budget savvy way to get the look. With a little help from the floral department at Trader Joe's, I pulled off this bountiful $10 centerpiece!     Materials:  1/2 gallon wide mouth mason jars (about $2) A few stems of simple Greenery ($2) A bouquet of Maroon Mums ($3) 8 stems of white stock flowers - Matthiola Incana ($3) Scissors Water Total cost = $10!     Step One: Stock flowers are nice because they take up a lot of space and make the arrangement look nice and full. Using the height of your mason jar as a guide, cut the stems to make three heights. The flowers of the shortest stem should just peek over the top of the jar. The flowers of the longest stem will dictate the height of the arrangement. The middle length should be somewhere in between.     Step Two: Arrange the stock flowers in a mason jar filled with water. Make sure to strip any greenery below the water line. Place the tallest stems in the center, the mid-length stems evenly around the center and the short stems around the periphery.     Step Three: Then go for the mums! Follow roughly the same strategy as in step two, although it's better to cut and work them in one stem at a time.     Step Four: Finally, embellish the arrangement with greenery.     Ta-da! These will bloom pretty for several days. As long as the flowers are fresh, you can arrange them two days in advance. You'll just need to refresh the water.
    5
  • Photos By: Jordan Ferney

    This project is super simple and very inexpensive. In the end, your guest will have an adorable little personalized vase with her name in a pretty font! The best part is- if you can get the jars for free- its pretty much just the cost of the flowers and a $5 paint pen. So great!

    Materials: Glass Jars (we used French yogurt jars but baby food jars would work great.) Wire (if you are going to hang them) Wirecutters Very Fine Paint Pen for glass (can be bought at a craft store.) Tape A list of your guests names printed out 2" in width. We used the font Lobster. Flowers

    Step One:   Make sure your jars are clean. Then tape the name you want to trace against the inside of the glass jar.     Step Two:   Taking the fine point glass pen, trace the name.  

    Step Three:   Remove the paper, then touch up any spots that need it.     Step Four:   If using as an escort card, write in the table number.     Step Five:   Add some flowers to each jar and display them on a table!     Display Ideas:   You can also display the vases on a wall or bush. If you go with this option, just add some wire to hang it.    

     

    18
  •  

    by Olivia Kanaley     Supplies: Wire berry garland (one 4 ft garland makes 5-6 wreaths) Natural floral wire Shipping tags Wire cutters White glue Paintbrush Clear glitter     Instructions: 1. Cut an 18" length of floral wire using wire cutters and form it into a circle about 2.5" in diameter as shown. 2. Snip sprigs from a wired berry garland and wrap them around the floral wire frame. 3. Continue until the wreath has berries all the way around.     4. Brush on white glue with a paintbrush and sprinkle with clear glitter. Let dry.     5. Tie on a tag with guest's name and table number.     Your escort wreaths will be a memorable memento from your winter wedding!    
    2
  • Photos By: Jordan Ferney

    Materials: Vellum paper, 56 sheets of paper, a sewing machine,  fishing weights (not pictured), an exacto knife and straight edge (or a stack cutter,) artist tape (for hanging)

    Cut the sheets of vellum into one inch strips. You can do this with an exacto knife or have it cut all at one time with a stack cutter. (If you decide to go the stack color route organizing the paper in the order you want it to hang in will save you some time.)Measure the height of the space where the mobiles will hang to figure out how long you want them. Keep in mind you'll want to keep the eyesight of the guests clear of any obstruction. Once you know the length of the mobiles, layout the different colors in the order you want. Repeat until it is close to the length of mobile you want. Then put it into a stack and it is ready to sew.

    Leave a 12" tail of thread at the beginning and start to sew down the middle of the first strip. (I found it is easiest to put a piece of tape on the sewing machine at the end of the strip as a guide to mark where the vellum should be sewn.) Continue feeding each addition strip into the sewing machine.

    At the end leave another long tail of string. As you are sewing, try to be consistent on the amount of space between each strip but if its not perfect its ok, this design is very forgiving. Our mobiles were about four feet and the actual sewing took about 10 minutes for each mobile.     Hang the mobiles at varying heights over the center of the table with artist tape.     If left by itself the bottom paper will curl up, add a simple fishing weight at the bottom to prevent this from happening and to add a nice polish to the project.     This bright and modern mobile project is perfect for a daytime wedding reception or shower and can be done in any color scheme. It will transform the room and make a big impact.     The best part is this whole project can be made on the cheap -- for under $25     Use your imagination - or any color palette - to go with your event theme.     Gorgeous!        
    5
  • Project By: Victoria Hudgins

    Photography By: Pictilio   This 3-D heart bunting is pretty and a great project to incorporate some handmade charm into your wedding. Hang between rows of seats, behind a dessert table, vertically to stage the ceremony, or around the head table as accent décor.     For a bunting of good length, purchase a heart punch from your local craft store. The small investment (about $10) will save your wrists from cutting hundreds of hearts out! You will also need colored craft paper, glue, and string.     Stamp out hearts for the length of your bunting. Each section of the bunting will use two hearts.     Once the hearts are punched, cut a length of thin string and begin gluing on the hearts. Lay one heart down (backside up). Center a small line of glue, then quickly layer the string on top and another heart (backside down). Measure a few inches and continue the process.     Once all the hearts are laid and dried, fold the top and bottom hearts away from one another for a pretty 3D effect.     Run the lengths of garland around cardboard dividers and tape in place as you go. This will make it easier to transport without getting tangled.  
    35
  •  

    By Project Wedding for our sponsor, Ann's Bridal Bargains       Add the perfect finishing touches throughout your wedding with ribbon. All you need are a few accent ideas and a little imagination!   Tie different colors of chiffon ribbon in a knot around a favor box to create a finished look and a secure spot for favor cards. Concept by Ann's Bridal Bargains.     Attach multi-colored satin and chiffon ribbons to the end of a wooden craft stick to create simple, affordable ribbon wands! Concept byAnn's Bridal Bargains.     Pink paper lanterns become adorable pieces of chair décor when hung with bright purple satin ribbon. Concept by Ann's Bridal Bargains.     Get creative with your invitation! We cut two slits, one on each side of the initial, to allow the threading of a large, brown satin ribbon. Concept by Ann's Bridal Bargains.     Ecru satin ribbon shines against mocha, two-piece favor boxes, lending a little extra luster to each favor. Concept by Ann's Bridal Bargains.     Enhance the look of a wedding program by wrapping a brown satin ribbon around the fold and finishing it with a knot and tassel. Concept by Ann's Bridal Bargains.     Satin bows can help tie your wedding colors to your wedding favors for a completely coordinated look. Concept by Ann's Bridal Bargains.     A red ribbon accents this invitation’s heart design for a cute, romantic look. Concept byAnn's Bridal Bargains.     For easy chair décor, dangle satin ribbons! They add the perfect amount of color to a ceremony or reception. Concept by Ann's Bridal Bargains.     Create texture and elegance with a ribbon and feather centerpiece! Concept by Ann's Bridal Bargains.     Two satin ribbons, secured by a favor label, create a stylish closure for these clear favor bags. Concept by Ann's Bridal Bargains.        
    24
  • By: Victoria Hudgins

    This DIY packaging is a fresh and modern way to present small favors to guests.         Fill each cocoon with something fun to keep your guests busy (like these bright and nostalgic finger pops) and something sweet to snack on.   Materials: 1/2 craft glue- 1/2 water mixture Large spool of embroidery thread Balloons (1 balloon for every 2 favors)   Instructions:   1. Blow up your balloons and tie a length of thread to the end of the balloon.   2. Begin wrapping thread around the balloon, the messier the wrap the better.   3. Once you have a good covering over the entire balloon, dip a brush into the glue mixture and coat the entire balloon. Hang the balloon by its end to dry. Note: You could also use liquid fabric stiffener for this step in the project, just fill a large bowl and completely dip your wrapped balloons in.     4. Once dry, cut the balloon in half at the center width. Each balloon will make two separate cocoon wraps.      5. Gently pop each balloon and pull away from the fabric. Fill your wraps and tie together with a ribbon and simple tag.     6. Rest each favor on a place setting for a creative, modern touch.  
    4
  •  

    By: Danyelle Mathews   Creating charming escort cards for your wedding doesn't have to take a lot of time or resources. Simply gather a few basic, inexpensive supplies to produce this budget-savvy, casual-chic concept.      Supplies: Manilla shipping tags Chalkboard paint Foam paintbrush   Step One Arrange your tags on a large work surface     Step Two Dip the foam paintbrush into the chalkboard paint and apply one brushstroke to each tag.     Step Three Allow the paint to dry completely, then write guests names and seating information on the tags with chalk.     Step Four Display the tags using a fabric backdrop, coordinating yarn or string and wooden clothespins.     {Photos by: Danyelle Matthews}
    11
  •  

    By: Danyelle Mathews   Creating charming escort cards for your wedding doesn't have to take a lot of time or resources. Simply gather a few basic, inexpensive supplies to produce this budget-savvy, casual-chic concept.      Supplies: Manilla shipping tags Chalkboard paint Foam paintbrush   Step One Arrange your tags on a large work surface     Step Two Dip the foam paintbrush into the chalkboard paint and apply one brushstroke to each tag.     Step Three Allow the paint to dry completely, then write guests names and seating information on the tags with chalk.     Step Four Display the tags using a fabric backdrop, coordinating yarn or string and wooden clothespins.     {Photos by: Danyelle Matthews}
    5
  • One of the trends we love about rustic weddings is the do-it-yourself projects even the least crafty brides create with wood. Here's what to display for every part of your big day: 

    Ceremony

    Photo by JK Photography

    Seating Arrangements

    Photo by Stacey Kokes Photography

    Reception

    \

    Photo by Twin Hearts Photography

    Chair Decor 

    Photo by Athena Pelton Photography

     

    38
  • Project and Photos by: Katelin Gallagher     I just love the look of a filled-to-the-brim centerpiece, but wanted to find a budget savvy way to get the look. With a little help from the floral department at Trader Joe's, I pulled off this bountiful $10 centerpiece!     Materials:  1/2 gallon wide mouth mason jars (about $2) A few stems of simple Greenery ($2) A bouquet of Maroon Mums ($3) 8 stems of white stock flowers - Matthiola Incana ($3) Scissors Water Total cost = $10!     Step One: Stock flowers are nice because they take up a lot of space and make the arrangement look nice and full. Using the height of your mason jar as a guide, cut the stems to make three heights. The flowers of the shortest stem should just peek over the top of the jar. The flowers of the longest stem will dictate the height of the arrangement. The middle length should be somewhere in between.     Step Two: Arrange the stock flowers in a mason jar filled with water. Make sure to strip any greenery below the water line. Place the tallest stems in the center, the mid-length stems evenly around the center and the short stems around the periphery.     Step Three: Then go for the mums! Follow roughly the same strategy as in step two, although it's better to cut and work them in one stem at a time.     Step Four: Finally, embellish the arrangement with greenery.     Ta-da! These will bloom pretty for several days. As long as the flowers are fresh, you can arrange them two days in advance. You'll just need to refresh the water.
    5
  • Photos By: Jordan Ferney

    This project is super simple and very inexpensive. In the end, your guest will have an adorable little personalized vase with her name in a pretty font! The best part is- if you can get the jars for free- its pretty much just the cost of the flowers and a $5 paint pen. So great!

    Materials: Glass Jars (we used French yogurt jars but baby food jars would work great.) Wire (if you are going to hang them) Wirecutters Very Fine Paint Pen for glass (can be bought at a craft store.) Tape A list of your guests names printed out 2" in width. We used the font Lobster. Flowers

    Step One:   Make sure your jars are clean. Then tape the name you want to trace against the inside of the glass jar.     Step Two:   Taking the fine point glass pen, trace the name.  

    Step Three:   Remove the paper, then touch up any spots that need it.     Step Four:   If using as an escort card, write in the table number.     Step Five:   Add some flowers to each jar and display them on a table!     Display Ideas:   You can also display the vases on a wall or bush. If you go with this option, just add some wire to hang it.    

     

    18
  •  

    by Olivia Kanaley     Supplies: Wire berry garland (one 4 ft garland makes 5-6 wreaths) Natural floral wire Shipping tags Wire cutters White glue Paintbrush Clear glitter     Instructions: 1. Cut an 18" length of floral wire using wire cutters and form it into a circle about 2.5" in diameter as shown. 2. Snip sprigs from a wired berry garland and wrap them around the floral wire frame. 3. Continue until the wreath has berries all the way around.     4. Brush on white glue with a paintbrush and sprinkle with clear glitter. Let dry.     5. Tie on a tag with guest's name and table number.     Your escort wreaths will be a memorable memento from your winter wedding!    
    2

Get Started!

Create inspiration boards, share ideas with your friends and wedding vendors, get feedback from brides like you, and lots more!

Have a question? Contact Support

Find Your Wedding Vendors

Featured Vendors Near You

    Related Photos
    Related Forums
    At Project Wedding we have thousands of photos to serve as inspiration for your wedding. Some of our many different photo galleries include the following: ...

    Planning Basics: Find the best place to register, find the best centerpiece for your color scheme, and find the perfect thank you gifts for your bridal party – all while staying under budget – with our wedding planning tips and ideas.

    DIY Wedding: With so many colorful images of unique wedding ideas we’ve found, plus all our real wedding images, you’ll find the most DIY wedding ideas here. From simple wedding favors to more complex origami wedding decorations – if we think you can make it, you’ll find it here (if it’s not here it doesn’t mean we don’t think you can make it, it just means we want you to send us a picture when your DIY project is done)!

    Fashion & Beauty: Don’t forget to find wedding ideas for yourself! We have thousands of pictures of bridal hair and makeup, as well as one of the largest selections of wedding dresses for you to browse.

    Wedding Venues: Not only do we have ideas for one-of-a-kind wedding venues as well as established wedding venues in your area, we have some of the very best wedding decoration ideas and wedding theme ideas for once you have nailed down the venue.

    Wedding Cake: While we must admit that wedding cake is delicious (mmmm, wedding cake, nom nom nom), your cake will also serve as a focal point of the wedding reception. Check out all of our wedding ideas for cake decorations as well as cake alternatives.

    Engagement Rings: Project Wedding doesn’t just start once you’ve gotten engaged. Register with us before the big question has been popped and share photos of your favorite engagement rings with your future better half.

    Honeymoon: Project Wedding doesn’t stop with the wedding either. We’ve included hundreds of post-wedding ideas to inspire your perfect honeymoon!