SHOW FILTERS
331

DIY Wedding Ideas

  • Photo: This Modern Romance 

    Photo booths are all the rage at weddings, and why not? They keep your guests entertained! Here's our step-by-step guide to make your own. 

    Materials Needed:

    Digital point-and-shoot camera Camera tripod  Remote shutter release  Backdrop Props 

    The Camera - Place a digital point-and-shoot camera on top of an extended tripod at eye level, tunr on the flash (unless you're having a spotlight) and connect a remote shutter release so guests can take their own photos. As backup, have polaroid cameras on standby. 

    Photos (from left to right): This Modern Romance and Anjuli 

    The Backdrop - Pick a colored or patterned piece of fabric that you can hang. If you're having an indoor wedding, pin it to a wall, or if you're having an outdoor wedding hang from curtain rods, secure with rope, and nail into the ground. 

    Photos (from left to right): Shelly Kroeger Photography and Birds of a Feather

    The Props - Go on a scavenger hunt! Look for props in your own home (like scarves, hats, glasses, frames). or make your own from paper (lips, mustaches, ties). Even provide chalkboards or dry erase boards for guests to write messages on. 

    Photo: This Modern Romance 

    The Location - Choose an area that doesn't obstruct the flow of the reception, but is still easily accessible. If you're having an indoor reception, consider a hallway or corner of the ballroom, or if you're having an outdoor wedding, consider next to the DJ that way guests can pose to the beat. 

    Photo: This Modern Romance

    The Extras - After the wedding is all said and done, you're back from your honeymoon, and all the gifts are unwrapped and put away, go through the camera's SD card and save the ones you'd like to put into a scrapbook. Those memories will last a lifetime! 

     

     

    3
  • Project and Photos by Erica O'Brien     Piped flowers are perfect for everything from backyard weddings to bridal showers to formal affairs. Although they had fallen out of favor during the height of the fondant craze, piping has made a huge comeback. You can use any buttercream recipe you like, but we prefer Swiss meringue buttercream. Because it's made with real butter, it has a slightly yellow tint, so be sure to practice on a small batch before adding lots of color.     What You’ll Need: Small (8” or 10”) piping bag fit with leaf tip (such as Wilton tip 68) Large (18” or larger) piping bag fit with small star tip (such as Wilton tip 1M) Ivory, light pink, dark pink and leaf green buttercream Large icing spatula Small icing spatula   To fill the piping bag, fold the top third over your hand.     Use small icing spatula to fill small piping bag about half full with leaf green buttercream.     To fill large piping bag, open base of piping bag wide so tip is visible. Think of interior of piping bag as a circular (pie-shaped) cavity divided into thirds.     Fill large piping bag with ivory, light pink, and dark pink buttercream, placing each color to fill only one third of the interior of the pie-shaped cavity in the piping bag.     Twist piping bag to create pressure on buttercream. Hovering above cake surface, squeeze piping bag until full star is formed. Release pressure so buttercream ceases to flow and lift up and away from cake
.      Repeat shape directly touching previous shape.     Continue on top and side of cake creating a round, piped mound. Continue creating round piped mounds around edge of cake.     To create leaves, twist piping bag to create pressure on buttercream.     Hovering above cake surface, squeeze piping bag until buttercream starts to come out. Gently touch buttercream to cake surface to adhere. Gradually release pressure while pulling away to create a pointed leaf.     Enjoy!    
    4
  • Photos By: Jennifer Kirk of Ambrosia Creative

    With a few everyday tools, transform plain white poster board into a chic geometric backdrop perfect for a modern-themed wedding.

      Supplies:  desktop printer This template 4 sheets of 8.5"x11" cardstock 9 sheets of 28"x22" white poster board  scissors x-acto knife yard stick or measuring tape self-healing cutting mat double-sided tape duct tape fishing line (to hang backdrop)

    Steps One - Three:   1. Download and print all four pages of template onto an 8.5" x 11" sheet of cardstock. Cut out shapes and tape pieces together to form a star. This is your template for tracing.    2. Trace template onto the back (dull side) of a sheet of poster board. On a 28"x22" sheet, you can fit three stars.    3. Cut out star shapes. From beginning to end, each star takes about five minutes. The backdrop I created measures 44"x 53" and is made up of 27 star shapes.     Step Four:  Stack the stars together, orienting them so the edges are even.     Step Five:   Working from left to right, lay out a row of stars, overlapping the "arms" of each piece. Use double-sided tape to affix edges together. Important: The center line of each star must be exactly vertical and parallel to each other. Keep each row perfectly straight and make sure each star piece is oriented the same direction so the pieces fit together consistently. This is to ensure you have a uniform, symmetrical backdrop. I used the slats of my floor as a guide to line up my stars, but you can also use a measuring tape or yardstick. My completed first row is five stars across.   '   Step Six:   Lay out the second row of stars. Starting on the left, place a star so that the center line meets where the two bottom stars join. Complete the row for a total of four stars. Check that the center line of each star is perfectly vertical across all rows. You can use your yardstick or measuring tape for this.     Steps Seven - Nine:   7. Repeat the process for a third row with five stars across. Then a fourth row with four stars across. Continue for a total of 6 rows.   8. Carefully flip the backdrop over and use small pieces of duct or masking tape to reinforce the "joints" where the stars meet.   9. Trim off the edges on the left, right, and bottom.     Step Ten:    To finish the top of the backdrop, trim off star pieces as indicated in picture. You will end up with three "points" along the top.     Step Eleven:    On the backside of the finished three points, attach a small piece of duct tape a couple inches wide. Punch out a hole using a small hole punch. To hang, string fishing line through the holes, knot, and attach to ceiling hooks.  
    10
  • By: Victoria Hudgins

    This DIY packaging is a fresh and modern way to present small favors to guests.         Fill each cocoon with something fun to keep your guests busy (like these bright and nostalgic finger pops) and something sweet to snack on.   Materials: 1/2 craft glue- 1/2 water mixture Large spool of embroidery thread Balloons (1 balloon for every 2 favors)   Instructions:   1. Blow up your balloons and tie a length of thread to the end of the balloon.   2. Begin wrapping thread around the balloon, the messier the wrap the better.   3. Once you have a good covering over the entire balloon, dip a brush into the glue mixture and coat the entire balloon. Hang the balloon by its end to dry. Note: You could also use liquid fabric stiffener for this step in the project, just fill a large bowl and completely dip your wrapped balloons in.     4. Once dry, cut the balloon in half at the center width. Each balloon will make two separate cocoon wraps.      5. Gently pop each balloon and pull away from the fabric. Fill your wraps and tie together with a ribbon and simple tag.     6. Rest each favor on a place setting for a creative, modern touch.  
    4
  • Photo By Chelsea Fuss

    Using five varieties of Lilac and a a few stems of springtime Spirea, we created a gathered, musky bouquet that any bride would be happy to sink her nose in for a day. The textured, romantic style is perfect for a modern, traditional or country wedding.             You will need: 30 stems of lilac.  We used: Korean Lilac (tiny flowers), "Beauty of Moscow (light pink), "Mount Baker" (white), Common Purple Lilac and Wedgewood Blue. 15 stems of spirea string flower clippers ribbon or cloth tape   Directions: 1. Condition flowers overnight. Cut the stems and cut a slit upwards in each stem to allow it to drink water. Sit them in lukewarm water in a cool place away from drafts, heat, and fruit and food.   2. Strip most of the leaves off the lilacs. Usually the stems are long so trim them to around 12" each. Make sure there is one stem per large blossom. If there are two stems, trim one off.     3. Make piles of each type and color.   4. Gather 1- 2 stems in your one hand. Add stems at a 45 degree angle. Turn the bouquet to the right each time you add stems.     The stems should spiral. For the most part, larger, heavier blooms should sit at the bottom of the bouquet and lighter buds and blossoms should sit near the top.     5. Secure with twine or string.     6. Add a ribbon. We used a patterned cloth tape (usually sold for bookbinding) and simply wrapped it on top of the string. If you use a ribbon, secure with a pin.     Tips for working with lilacs: Always give them a clean cut when you bring them home. Cut at an angle, and then cut upwards into the stem, once. Use lukewarm water, lilacs don't like to be shocked by really cold or hot water.  If some blooms start to wilt, recut the stems. Keep away from fruit, food, direct sunlight, and drafts. Plan to buy a bit more than you need, a few stems in the bunch will always wilt.   Don't be afraid to work with lilac, if you remember these simple tips, it's easy!   Photo By Chelsea Fuss
    9
  •  

    by Olivia Kanaley     Supplies: Wire berry garland (one 4 ft garland makes 5-6 wreaths) Natural floral wire Shipping tags Wire cutters White glue Paintbrush Clear glitter     Instructions: 1. Cut an 18" length of floral wire using wire cutters and form it into a circle about 2.5" in diameter as shown. 2. Snip sprigs from a wired berry garland and wrap them around the floral wire frame. 3. Continue until the wreath has berries all the way around.     4. Brush on white glue with a paintbrush and sprinkle with clear glitter. Let dry.     5. Tie on a tag with guest's name and table number.     Your escort wreaths will be a memorable memento from your winter wedding!    
    2
  • Photos By Carly Taylor

    There is no better way to ensure your guests remember the special day you are planning then to post the date on their fridge!   In lieu of giving them a face photo to stare at for the coming 4-9 months, why not hand off a pretty felt magnet that can grace their kitchen with your love even after you're married!     Materials: Felt Scissors Ribbon A custom stamp Small adhesive magnets Embroidery thread A needle   To Make:   Cut felt (2 layers at a time) in the shape of a heart.     Your hearts don't have to be perfect - the more unique and homemade the better!     Cut a coordinating ribbon and stamp in your wedding date.     Place the dated ribbon coming out from one side of the heart.     Place the top layer over the bottom and begin hand stitching the heart together using embroidery thread. Be sure to stitch through the ribbon to hold it into place.       Almost there ...     Send off with a sweet announcement to your guests.     Photos By Carly Taylor
    10
  • Photos By: Jordan Ferney

    Materials: 2 feet of 18" Russian Veiling Comb Thread and Needle Ruler Scissors  

    Important Note: There are two sides of the veiling: finished and unfinished. You want the finished end to run across your face NOT the unfinished side.

    Starting at point A start sewing in and out of the diamond shapes to gather the fabric. You'll continue sewing in and out on all sides until you get to point B.     Sew it to a hair comb.     After you attach it in your hair on the side of your head with bobby pins, then add an embellishment like a flower or feather to cover the comb.     Birdcage veils are made out of Russian Netting or Russian Veiling which is a millinery material. You can usually find it at a really good fabric store or online.     The veiling usually comes in three lengths 9" 12" and 18".     Isn't she gorgeous! If you just want a little coverage over your hair you want 9".     If you want it to cover your eyes, you'll want 12" and if you want it to cover your nose or chin you'll want the 18" veiling (cut it down to 16" to cover the nose.)     It comes in almost every color and you can also find veiling with chenille dots or pearls if you wanted to add embellishment in that way.     Inspired by precious birdcages everywhere! Enjoy!

     

     

    12
  •  

    Photos by: Chelsea Fuss     You will need:  A paper photo album (we used this one from Kolo) works great!  About 1/2 a yard of fabric  Ribbon or string Photo corners Fabric glue Scissors An iron     Take out the ribbon the photo album came with and separate the paper cover and set the pages aside.     Cut a piece of fabric that will cover the outside and inside of the paper photo album cover.     Press the fabric over the paper. Secure the fabric on the inside. fold over raw edges, press them and then secure them to the cover with glue.     Tie together the pages and secure them to the fabric cover with string or ribbon.     For the window opening, cut an X in the fabric and glue the excess fabric underneath the cover.     Secure photos with photo corners.      
    1
  •  

    Concept by: Victoria Hudgins Photos by Erin Holland   Add a dash of confetti to your party in the form of a chandelier! This looks fabulous hung in multiples on top of a dessert bar, or hung individually as centerpieces.     In fact, you can turn your confetti chandelier into a 'cake topper,' who says that a 'topper' has to be placed directly on top of the cake?     Cut out one inch confetti rounds from colored paper. We used about 120 rounds for this installation. I would suggest using a monotone color scheme or 4-5 coordinating colors on each hoop.     Thread the confetti dots together. Begin at the top, leaving enough thread to attach the string to an embroidery hoop. Have your hot glue gun ready and place a tiny drop of glue on the bottom of each dot to hold it in place.     Using an embroidery hoop, tie four to six strings across the top in a criss cross pattern.     One at a time, tie the strands of confetti dots onto the hoop and string base. You can paint or adorn the hoop as needed to match your wedding décor.     Hang the installation above a cake or elsewhere; adjust the length of the strands for just the right balance.      
    10
  • Photo: This Modern Romance 

    Photo booths are all the rage at weddings, and why not? They keep your guests entertained! Here's our step-by-step guide to make your own. 

    Materials Needed:

    Digital point-and-shoot camera Camera tripod  Remote shutter release  Backdrop Props 

    The Camera - Place a digital point-and-shoot camera on top of an extended tripod at eye level, tunr on the flash (unless you're having a spotlight) and connect a remote shutter release so guests can take their own photos. As backup, have polaroid cameras on standby. 

    Photos (from left to right): This Modern Romance and Anjuli 

    The Backdrop - Pick a colored or patterned piece of fabric that you can hang. If you're having an indoor wedding, pin it to a wall, or if you're having an outdoor wedding hang from curtain rods, secure with rope, and nail into the ground. 

    Photos (from left to right): Shelly Kroeger Photography and Birds of a Feather

    The Props - Go on a scavenger hunt! Look for props in your own home (like scarves, hats, glasses, frames). or make your own from paper (lips, mustaches, ties). Even provide chalkboards or dry erase boards for guests to write messages on. 

    Photo: This Modern Romance 

    The Location - Choose an area that doesn't obstruct the flow of the reception, but is still easily accessible. If you're having an indoor reception, consider a hallway or corner of the ballroom, or if you're having an outdoor wedding, consider next to the DJ that way guests can pose to the beat. 

    Photo: This Modern Romance

    The Extras - After the wedding is all said and done, you're back from your honeymoon, and all the gifts are unwrapped and put away, go through the camera's SD card and save the ones you'd like to put into a scrapbook. Those memories will last a lifetime! 

     

     

    3
  • Project and Photos by Erica O'Brien     Piped flowers are perfect for everything from backyard weddings to bridal showers to formal affairs. Although they had fallen out of favor during the height of the fondant craze, piping has made a huge comeback. You can use any buttercream recipe you like, but we prefer Swiss meringue buttercream. Because it's made with real butter, it has a slightly yellow tint, so be sure to practice on a small batch before adding lots of color.     What You’ll Need: Small (8” or 10”) piping bag fit with leaf tip (such as Wilton tip 68) Large (18” or larger) piping bag fit with small star tip (such as Wilton tip 1M) Ivory, light pink, dark pink and leaf green buttercream Large icing spatula Small icing spatula   To fill the piping bag, fold the top third over your hand.     Use small icing spatula to fill small piping bag about half full with leaf green buttercream.     To fill large piping bag, open base of piping bag wide so tip is visible. Think of interior of piping bag as a circular (pie-shaped) cavity divided into thirds.     Fill large piping bag with ivory, light pink, and dark pink buttercream, placing each color to fill only one third of the interior of the pie-shaped cavity in the piping bag.     Twist piping bag to create pressure on buttercream. Hovering above cake surface, squeeze piping bag until full star is formed. Release pressure so buttercream ceases to flow and lift up and away from cake
.      Repeat shape directly touching previous shape.     Continue on top and side of cake creating a round, piped mound. Continue creating round piped mounds around edge of cake.     To create leaves, twist piping bag to create pressure on buttercream.     Hovering above cake surface, squeeze piping bag until buttercream starts to come out. Gently touch buttercream to cake surface to adhere. Gradually release pressure while pulling away to create a pointed leaf.     Enjoy!    
    4
  • Photos By: Jennifer Kirk of Ambrosia Creative

    With a few everyday tools, transform plain white poster board into a chic geometric backdrop perfect for a modern-themed wedding.

      Supplies:  desktop printer This template 4 sheets of 8.5"x11" cardstock 9 sheets of 28"x22" white poster board  scissors x-acto knife yard stick or measuring tape self-healing cutting mat double-sided tape duct tape fishing line (to hang backdrop)

    Steps One - Three:   1. Download and print all four pages of template onto an 8.5" x 11" sheet of cardstock. Cut out shapes and tape pieces together to form a star. This is your template for tracing.    2. Trace template onto the back (dull side) of a sheet of poster board. On a 28"x22" sheet, you can fit three stars.    3. Cut out star shapes. From beginning to end, each star takes about five minutes. The backdrop I created measures 44"x 53" and is made up of 27 star shapes.     Step Four:  Stack the stars together, orienting them so the edges are even.     Step Five:   Working from left to right, lay out a row of stars, overlapping the "arms" of each piece. Use double-sided tape to affix edges together. Important: The center line of each star must be exactly vertical and parallel to each other. Keep each row perfectly straight and make sure each star piece is oriented the same direction so the pieces fit together consistently. This is to ensure you have a uniform, symmetrical backdrop. I used the slats of my floor as a guide to line up my stars, but you can also use a measuring tape or yardstick. My completed first row is five stars across.   '   Step Six:   Lay out the second row of stars. Starting on the left, place a star so that the center line meets where the two bottom stars join. Complete the row for a total of four stars. Check that the center line of each star is perfectly vertical across all rows. You can use your yardstick or measuring tape for this.     Steps Seven - Nine:   7. Repeat the process for a third row with five stars across. Then a fourth row with four stars across. Continue for a total of 6 rows.   8. Carefully flip the backdrop over and use small pieces of duct or masking tape to reinforce the "joints" where the stars meet.   9. Trim off the edges on the left, right, and bottom.     Step Ten:    To finish the top of the backdrop, trim off star pieces as indicated in picture. You will end up with three "points" along the top.     Step Eleven:    On the backside of the finished three points, attach a small piece of duct tape a couple inches wide. Punch out a hole using a small hole punch. To hang, string fishing line through the holes, knot, and attach to ceiling hooks.  
    10
  • By: Victoria Hudgins

    This DIY packaging is a fresh and modern way to present small favors to guests.         Fill each cocoon with something fun to keep your guests busy (like these bright and nostalgic finger pops) and something sweet to snack on.   Materials: 1/2 craft glue- 1/2 water mixture Large spool of embroidery thread Balloons (1 balloon for every 2 favors)   Instructions:   1. Blow up your balloons and tie a length of thread to the end of the balloon.   2. Begin wrapping thread around the balloon, the messier the wrap the better.   3. Once you have a good covering over the entire balloon, dip a brush into the glue mixture and coat the entire balloon. Hang the balloon by its end to dry. Note: You could also use liquid fabric stiffener for this step in the project, just fill a large bowl and completely dip your wrapped balloons in.     4. Once dry, cut the balloon in half at the center width. Each balloon will make two separate cocoon wraps.      5. Gently pop each balloon and pull away from the fabric. Fill your wraps and tie together with a ribbon and simple tag.     6. Rest each favor on a place setting for a creative, modern touch.  
    4
  • Photo By Chelsea Fuss

    Using five varieties of Lilac and a a few stems of springtime Spirea, we created a gathered, musky bouquet that any bride would be happy to sink her nose in for a day. The textured, romantic style is perfect for a modern, traditional or country wedding.             You will need: 30 stems of lilac.  We used: Korean Lilac (tiny flowers), "Beauty of Moscow (light pink), "Mount Baker" (white), Common Purple Lilac and Wedgewood Blue. 15 stems of spirea string flower clippers ribbon or cloth tape   Directions: 1. Condition flowers overnight. Cut the stems and cut a slit upwards in each stem to allow it to drink water. Sit them in lukewarm water in a cool place away from drafts, heat, and fruit and food.   2. Strip most of the leaves off the lilacs. Usually the stems are long so trim them to around 12" each. Make sure there is one stem per large blossom. If there are two stems, trim one off.     3. Make piles of each type and color.   4. Gather 1- 2 stems in your one hand. Add stems at a 45 degree angle. Turn the bouquet to the right each time you add stems.     The stems should spiral. For the most part, larger, heavier blooms should sit at the bottom of the bouquet and lighter buds and blossoms should sit near the top.     5. Secure with twine or string.     6. Add a ribbon. We used a patterned cloth tape (usually sold for bookbinding) and simply wrapped it on top of the string. If you use a ribbon, secure with a pin.     Tips for working with lilacs: Always give them a clean cut when you bring them home. Cut at an angle, and then cut upwards into the stem, once. Use lukewarm water, lilacs don't like to be shocked by really cold or hot water.  If some blooms start to wilt, recut the stems. Keep away from fruit, food, direct sunlight, and drafts. Plan to buy a bit more than you need, a few stems in the bunch will always wilt.   Don't be afraid to work with lilac, if you remember these simple tips, it's easy!   Photo By Chelsea Fuss
    9
  •  

    by Olivia Kanaley     Supplies: Wire berry garland (one 4 ft garland makes 5-6 wreaths) Natural floral wire Shipping tags Wire cutters White glue Paintbrush Clear glitter     Instructions: 1. Cut an 18" length of floral wire using wire cutters and form it into a circle about 2.5" in diameter as shown. 2. Snip sprigs from a wired berry garland and wrap them around the floral wire frame. 3. Continue until the wreath has berries all the way around.     4. Brush on white glue with a paintbrush and sprinkle with clear glitter. Let dry.     5. Tie on a tag with guest's name and table number.     Your escort wreaths will be a memorable memento from your winter wedding!    
    2
  • Photos By Carly Taylor

    There is no better way to ensure your guests remember the special day you are planning then to post the date on their fridge!   In lieu of giving them a face photo to stare at for the coming 4-9 months, why not hand off a pretty felt magnet that can grace their kitchen with your love even after you're married!     Materials: Felt Scissors Ribbon A custom stamp Small adhesive magnets Embroidery thread A needle   To Make:   Cut felt (2 layers at a time) in the shape of a heart.     Your hearts don't have to be perfect - the more unique and homemade the better!     Cut a coordinating ribbon and stamp in your wedding date.     Place the dated ribbon coming out from one side of the heart.     Place the top layer over the bottom and begin hand stitching the heart together using embroidery thread. Be sure to stitch through the ribbon to hold it into place.       Almost there ...     Send off with a sweet announcement to your guests.     Photos By Carly Taylor
    10
  • Photos By: Jordan Ferney

    Materials: 2 feet of 18" Russian Veiling Comb Thread and Needle Ruler Scissors  

    Important Note: There are two sides of the veiling: finished and unfinished. You want the finished end to run across your face NOT the unfinished side.

    Starting at point A start sewing in and out of the diamond shapes to gather the fabric. You'll continue sewing in and out on all sides until you get to point B.     Sew it to a hair comb.     After you attach it in your hair on the side of your head with bobby pins, then add an embellishment like a flower or feather to cover the comb.     Birdcage veils are made out of Russian Netting or Russian Veiling which is a millinery material. You can usually find it at a really good fabric store or online.     The veiling usually comes in three lengths 9" 12" and 18".     Isn't she gorgeous! If you just want a little coverage over your hair you want 9".     If you want it to cover your eyes, you'll want 12" and if you want it to cover your nose or chin you'll want the 18" veiling (cut it down to 16" to cover the nose.)     It comes in almost every color and you can also find veiling with chenille dots or pearls if you wanted to add embellishment in that way.     Inspired by precious birdcages everywhere! Enjoy!

     

     

    12
  •  

    Photos by: Chelsea Fuss     You will need:  A paper photo album (we used this one from Kolo) works great!  About 1/2 a yard of fabric  Ribbon or string Photo corners Fabric glue Scissors An iron     Take out the ribbon the photo album came with and separate the paper cover and set the pages aside.     Cut a piece of fabric that will cover the outside and inside of the paper photo album cover.     Press the fabric over the paper. Secure the fabric on the inside. fold over raw edges, press them and then secure them to the cover with glue.     Tie together the pages and secure them to the fabric cover with string or ribbon.     For the window opening, cut an X in the fabric and glue the excess fabric underneath the cover.     Secure photos with photo corners.      
    1
  •  

    Concept by: Victoria Hudgins Photos by Erin Holland   Add a dash of confetti to your party in the form of a chandelier! This looks fabulous hung in multiples on top of a dessert bar, or hung individually as centerpieces.     In fact, you can turn your confetti chandelier into a 'cake topper,' who says that a 'topper' has to be placed directly on top of the cake?     Cut out one inch confetti rounds from colored paper. We used about 120 rounds for this installation. I would suggest using a monotone color scheme or 4-5 coordinating colors on each hoop.     Thread the confetti dots together. Begin at the top, leaving enough thread to attach the string to an embroidery hoop. Have your hot glue gun ready and place a tiny drop of glue on the bottom of each dot to hold it in place.     Using an embroidery hoop, tie four to six strings across the top in a criss cross pattern.     One at a time, tie the strands of confetti dots onto the hoop and string base. You can paint or adorn the hoop as needed to match your wedding décor.     Hang the installation above a cake or elsewhere; adjust the length of the strands for just the right balance.      
    10

Get Started!

Create inspiration boards, share ideas with your friends and wedding vendors, get feedback from brides like you, and lots more!

Have a question? Contact Support

Find Your Wedding Vendors

Featured Vendors Near You

Related Photos
Related Forums
What could be more fun than telling your friends and family that you made everything at your wedding yourself? Well, an entire Do it Yourself wedding ...

might be going a bit overboard, but Project Wedding has tons of DIY wedding ideas for you to implement for your big day.

Whether you can’t cut a straight line or you’re the next Martha Stewart, we have DIY wedding ideas for every type of bride. From DIY wedding favors to DIY wedding decorations to DIY wedding invitations, if you’re interested in doing it yourself, we can help! With so many unique images of wedding ideas we’ve found, plus all our great photos of real weddings, you’ll find the most DIY wedding ideas here.

From simple wrap and tie wedding favors to more complex origami wedding decorations – if we think you can make it, you’ll find it here. These DIY favors are guaranteed to thrill your guests without emptying your pockets. Even if you’re not very crafty, we still have some fast and easy project ideas that you might like. And if you have creative friends or relatives, chances are they will be more than happy to help you.

DIY weddings are a great way to put a personal touch on all of your wedding details. You can add your initials to your wedding favors, make a candy buffet that complements your wedding colors, or create a masterpiece that looks store bought but cost way less. Whatever your reason for wanting a Do it Yourself wedding, our articles will help make your dreams come to life.

With so many great DIY wedding ideas, all of your family, friends and honored wedding guests are guaranteed to remember how amazingly creative your wedding day was. Now go get crafty!