SHOW FILTERS
331

DIY Wedding Ideas

  • Photos By: Chelsea Fuss

    You'll need:  1. 3 cake pans (sizes: 11", 8", 4.5") 2. A cake stand (aprox "12 round) 3. A pound cake recipe 4. Buttercream frosting (4 cups) 5. 1 frosting knife 6. Flowers + herbs (make sure they are organic and edible!)     Bake your cakes the night before and let them cool overnight. Put together with toothpicks holding the layers.     Once you have placed your toothpicks, stack your cakes carefully!     Almost there...     Voila!     Measure layers to make sure that all the cakes are centered from all sides.     Frost with frosting knife -- get the knife wet to make it extra smooth.     Clean off edges of the cake stand. Keep refrigerated until right before serving.     Your cake is ready to decorate now!     Have fun adding edible herbs and flowers.     Herbs will hold up for a long time, but add the flowers last minute so add them that morning, securing them with frosting.     Using a pound cake recipe is your best bet because they do not crumble. Buttercream frosting can melt easily, keep your cake as cool as possible before serving!     Your gorgeous cake is ready!     The best part ... tasting the sweet creation.      

     

    14
  •  

    by Jordan Ferney   Make a cute and easy display for your pinwheel escort cards. For this project, we used a pretty floral origami paper. Origami works great because there is a different pattern on the front than there is on the back.     Supplies for Pinwheels: 1. Floral Origami Paper $5 2. Dowels or Pencils (the pencils work well because you can use the eraser for the pin.) $4 3. Map Pins $4 4. Scissors 5. Strips of cardstock for names For the Display: 1. Flat wood $1/each 2. String 3. Drill and drill bits       Step One: Cut the origami paper in fourths. Step Two: Fold the small square corner to corner in both directions.       Step Three: Cut along the folded line 2/3 of the way toward the center on all four corners. Step Four: Now you are ready to pin. Take one corner of each cut section and pin them all in the middle of the square then add the strip of paper before pinning it all to a dowel or pencil.        Step Five: Depending on how many pinwheels you have, mark the flat wood piece with a pencil about 4" apart so you know where to drill the holes. The holes should be the exact size of the stick. We prefer it like that so you can put the pinwheel as high or low as you want and it will hold in place. Drill the holes along the pencil marks.     Step Six: Drill a small hole on each side for the string to go through. Step Seven: Put the string through the holes and tie knots an equal distance on each side to hold the wood in place.     Step Eight: Assemble pinwheels in the rack and hand from a bush or a wall. For a display rack, we got some flat wood in the dowel section of an art supply store and then just drilled holes the size of the pencils.     You can create pinwheels to fit any color palette.     This whole DIY goes pretty fast depending on how many pinwheels you need. We did this whole project for $17.     Your guests will just love them - see!?!  
    13
  •  

    Project By: Victoria Hudgins Photos By: Prokopets Studios   Want to leave your ceremony in style? There is no better way to do it then under a canopy of flying confetti! Here is a fun way to present the confetti to your guests; be ready for a colorful shower of love!     Materials: Vellum paper, scissors, a small hole punch, embroidery thread, a needle and a stack of scrapbook paper in your color palette     Step One: The first step is to make the confetti, which is the easiest part but also the most time consuming. I would suggest tackling 20 sheets or so each day over a week. More than that and your hands will get VERY tired. To make the confetti, simply punch holes out of the paper, easy peasy!     Step Two: Next, cut the hearts from your vellum; you will need to cut double the number of confetti packs you hope to make.     Step Three: Once everything is cut, lay the hearts out and top every other one with a handful of confetti. Top the bottom half with another vellum heart.     Step Four: Hold one end of the heart and starting at the bottom, begin hand sewing around the other side with embroidery thread. Make about 7 stitches around. Do not sew these too tight and leave a decent length of thread at the bottom of each heart. Tie once at the bottom, in a lose knot. The idea is to keep the confetti in but to allow your guests to easily pull the thread right out.     Lay out your hearts with a note of instruction for guests to pull the thread and throw up their hearts when it is time. A beautiful shower of bright confetti and iridescent hearts awaits your finale.     Tip: Be sure to check with your venue before planning this project- not all venues allow you to throw confetti or rice. Happy hole punching!    

     

    0
  • Project Design By: Victoria Hudgins

    Photos By: Carly Taylor

    Using watercolor in your wedding can be an easy way to add both color and pretty artistic flair. Make drink tags, escort cards, or favor labels with these easy instructions.     Materials: You will need watercolor paints, paper tags, a white crayon, a paint brush and water.     Process: Write in your details on the paper tag with a white crayon. I did a combo of table numbers and simple words to show how each would look. Be sure to press firmly with the crayon.     A preview of the finished product. Loving this vibrant orange.     Dip your brush in the water and the paint, before stroking lightly over your tag.     Mix colors and do a couple coats to ensure good texture.
      The watercolors will not adhere to the wax portion of the tag where the crayon has left its mark.
      What a difference adding favor tags makes! Let dry and attach to your favor or item of choice!     Lastly, get creative and have fun!      Project Design By: Victoria Hudgins Photos By: Carly Taylor

     

    10
  • Photos By: Victoria Hudgins

    Paper marbling is a technique that has been around for a long time. The process leaves a beautiful impression on paper giving a high design style to invitations, gift tags and stationery. For your wedding why not take this traditional paper impact a little further by saturating your paint and marbling in a bold, modern and fresh way?     Materials: Heavy stock white paper, 2-3 colors of acrylic paints, a shallow pan and water.     Step One: Begin by dropping each of your paints into the water filled pan. Drip the paints in a straight line one at a time.     Step Two: Using a kitchen skewer, blend the paints together. When you do this some of the paint will rise to the top but (unlike normal marbling) the weight of the paint will allow a majority of it to remain on the bottom of the pan.     Step Three: Holding your paper on both ends make a U shape with it and set it in the water, bottom of the U first. This will prevent any air bubbles from ending up in your final design.     Step Four: Once the paper is entirely in the pan quickly take two fingers and push it toward the bottom of your pan. Swirl it around the bottom of the pan in a circular motion, this is where it picks up the bold saturation.     Step Five: Pull the paper out and let dry for 6-8 hours.     Once the paper is dry, cut it up for tags, seating cards or any other paper-based project you've dreamed up.       Project styling, design concept + photography by Victoria Hudgins    

     

    5
  • By: Jenny Batt

    Fringe is still everywhere and I don’t think it's going out of style anytime soon. Traditionally, you take tiny pieces of fringe and cover shapes and large paper mache objects. For this DIY, I will show you a new technique to breeze through fringing anything.     Materials: Tissue Paper Cutting Mat and Rotary Cutter Scissors (or fringing scissors – easier) Elmer’s Glue Poster Board   Step One Lay several sheets of tissue paper flat and fold in half lengthwise. Use your cutting mat, a straight edge and your rotary cutter, to cut strips 2.5” wide across the fold.     Step Two Take each set of strips and unfold. Refold lengthwise.     Step Three Fold in half widthwise and cut fringe on the bottom (not the folded) edge.     Step Four Separate each fringed strip and refold lengthwise. Take your poster board and across the short edge, run a thin bead of glue across the length. Lay a fringed piece across the glue and press lightly to adhere. If the strip isn’t quite long enough to reach, just add pieces as needed. For the next layer add another bead of glue above the first strip and add another strip.     Step Five Repeat until the entire poster board is covered. Let dry.     Step Six Print out letters from your computer. Cut out the letters from the paper. Place each letter on the fringed board, adjusting it so the fringe goes left to right across the letter, and cut loosely around the edge. Once you have the smaller piece, use the template to cut out the shape perfectly.     Step Seven Repeat with remaining letters. Sometimes after cutting, the tops of the letters are missing fringe. Simply add touch up pieces of tissue paper fringe and glue down. Let dry and trim.     Step Eight Use a bunting template to make a fun garland. You can use the fringed poster board to make any shapes you like or keep as is for a fun backdrop or to use as a tray liner. The fringing goes quickly using this method and is less tedious than fringing each shape individually.     Step Nine To make a garland from the letters, simply flip over the pieces and tape down to twine. Here I used washi tape so I can remove and adjust the letters easily after hanging.     photos by hankandhunt.com      
    4
  • Photos By: Chelsea Fuss

    How sweet would it be to have all of your guests sporting a colorful corsage! Here's how to create them.

    Materials: One stem per guest (carnations, roses and dendrobium orchids all work well for this project) Traditional paper florist ribbon Corsage pins A sign with instructions for guests     Directions:   1. Cut each stem down to one inch.   2. Tie ribbon around and trim the ends.     3. Secure with a corsage pin.     4. Arrange on a table cloth or tray with an extra dish of pins and a sign with instructions.     A tip: Prep the flowers the evening before and keep in the fridge until the event.     These corsages will make your guests feel special and will bring color to your photos!     Enjoy!

     

    5
  • Photo By Chelsea Fuss

    This centerpiece is stunning - mainly because of the vibrant blooms!      Materials: 10 red, white and pink anemones  5 mini daffodils 8 orange, red, and white ranunculus (better if blown open) Ranunculus greens and buds English daisies in pink and white (cut from 2 plants) Modern vase Rocks Chicken wire or a flower frog Clippers

    Directions:

    First, fill the vase with rocks half way up the vase. Fill with water. Start filling the vase with stems. The rocks will keep the flowers in place and help you create the shape of your flower arrangement.     Try to create an "s" shape with greens and lighter flowers cascading to the right and diagonally across at the bottom of the vase.     Place larger blossoms at the bottom of the arrangement and lighter smaller buds and greens towards the top.     We added a table number made from a simple number sticker purchased at a grocery/drygoods store...     ... and a painted horse for some humor!     Tip: To make this arrangement more budget friendly, substitute more greens for flowers. The recipe is made of spring flowers. For a summer or fall version substitute with: dahlias (the single petaled varieties would work great), iceland poppies, garden roses, peonies, california poppies, daisies, roses.   Photo By Chelsea Fuss
    5
  • Photos By: Chelsea Fuss

    Inspired by the sweet strawberry cakes that Swedes make during their Midsummer holiday each year, we came up with this festive wedding cake! It's perfect for an outdoor, rustic wedding. You can make the cake yourself, or simply embellish a store bought cake using our styling inspiration. It's easy and such a unique idea!

    First you'll need a white dome cake. We used a citrus flavor dome cake filled with whip cream, from a small family bakery, and it was delicious. We just took off the doily and cardboard it came on and slid it onto a rustic wooden board. You could also make your own. Here are instructions on how to make a dome cake.

    You will need around two pints of strawberries per cake.

    Cut the stems off and slice the strawberries in half.

    Lay the strawberries flat side down, all over the cake.

    Keep the cake in the fridge until just before the reception.

    Add edible wildflowers a few hours before your event. We used buckwheat, meadowsweet, and winter savory. The flavor of these flowers worked wonderfully with the citrus flavor of the cake!     We laid them all around the cake and sprinkled the petals and leaves on top of it. The more you add, the better it looks. Make sure the flowers you use are edible and have not been sprayed with pesticides!     More ideas for edible flowers: pansies violets nasturtium roses calendula     Display your cake on a rustic farm table and decorate with flowers around the bottom of the cake like in slide one. Your guests will love digging into this summery treat!    
    4
  • Photos by Jordan Ferney

      Supplies: 1. Metal Zinc Tray 14"x14"($10) 2. Wheat Grass Seeds($4)  3. Potting Soil ($8) 4. Gravel for Drainage     Step One: Put a layer of gravel to help with drainage. The metal tray we used did not have built in drainage so the gravel helps with that. Step Two: Put a layer of soil on top of the gravel, make sure you leave 1/2" of the metal vessel showing. Step Three: Put a generous layer of seeds down, make sure it is even up to the edges. Step Four: Cover the seeds with a .25" layer of soil. Pat down.     Step Five: Water the seeds with a gentle flow of water (either a watering can or a paper cup with holes punched in the bottom)so the seeds aren't washed around. Keep in a sunny area and water daily, keeping the soil moist. Grass should be ready 7-10 days after planting.     This gorgeous wheat grass is 14 days old.     The grass will eventually look overgrown so you'll want to test it in advance of the big day so you'll know what works best for you.     Wheat grass is an easy way to liven up a spring or summer event. You can use it for seating cards or even incorporate it into centerpieces.     For the seating cards, you will need the cards and popsicle sticks ( $2 from a craft store).     Wheat grass seeds can be bought at a health food store like Whole Foods. If after a week of growth you notice bare spots you can move the grass that is full around to cover it and give it a few days to grow in.     Voila! Your gorgeous DIY project is done!     This seating card display costs under $25.     Happy DIYing!

     

    4
  • Photos By: Chelsea Fuss

    You'll need:  1. 3 cake pans (sizes: 11", 8", 4.5") 2. A cake stand (aprox "12 round) 3. A pound cake recipe 4. Buttercream frosting (4 cups) 5. 1 frosting knife 6. Flowers + herbs (make sure they are organic and edible!)     Bake your cakes the night before and let them cool overnight. Put together with toothpicks holding the layers.     Once you have placed your toothpicks, stack your cakes carefully!     Almost there...     Voila!     Measure layers to make sure that all the cakes are centered from all sides.     Frost with frosting knife -- get the knife wet to make it extra smooth.     Clean off edges of the cake stand. Keep refrigerated until right before serving.     Your cake is ready to decorate now!     Have fun adding edible herbs and flowers.     Herbs will hold up for a long time, but add the flowers last minute so add them that morning, securing them with frosting.     Using a pound cake recipe is your best bet because they do not crumble. Buttercream frosting can melt easily, keep your cake as cool as possible before serving!     Your gorgeous cake is ready!     The best part ... tasting the sweet creation.      

     

    14
  •  

    by Jordan Ferney   Make a cute and easy display for your pinwheel escort cards. For this project, we used a pretty floral origami paper. Origami works great because there is a different pattern on the front than there is on the back.     Supplies for Pinwheels: 1. Floral Origami Paper $5 2. Dowels or Pencils (the pencils work well because you can use the eraser for the pin.) $4 3. Map Pins $4 4. Scissors 5. Strips of cardstock for names For the Display: 1. Flat wood $1/each 2. String 3. Drill and drill bits       Step One: Cut the origami paper in fourths. Step Two: Fold the small square corner to corner in both directions.       Step Three: Cut along the folded line 2/3 of the way toward the center on all four corners. Step Four: Now you are ready to pin. Take one corner of each cut section and pin them all in the middle of the square then add the strip of paper before pinning it all to a dowel or pencil.        Step Five: Depending on how many pinwheels you have, mark the flat wood piece with a pencil about 4" apart so you know where to drill the holes. The holes should be the exact size of the stick. We prefer it like that so you can put the pinwheel as high or low as you want and it will hold in place. Drill the holes along the pencil marks.     Step Six: Drill a small hole on each side for the string to go through. Step Seven: Put the string through the holes and tie knots an equal distance on each side to hold the wood in place.     Step Eight: Assemble pinwheels in the rack and hand from a bush or a wall. For a display rack, we got some flat wood in the dowel section of an art supply store and then just drilled holes the size of the pencils.     You can create pinwheels to fit any color palette.     This whole DIY goes pretty fast depending on how many pinwheels you need. We did this whole project for $17.     Your guests will just love them - see!?!  
    13
  •  

    Project By: Victoria Hudgins Photos By: Prokopets Studios   Want to leave your ceremony in style? There is no better way to do it then under a canopy of flying confetti! Here is a fun way to present the confetti to your guests; be ready for a colorful shower of love!     Materials: Vellum paper, scissors, a small hole punch, embroidery thread, a needle and a stack of scrapbook paper in your color palette     Step One: The first step is to make the confetti, which is the easiest part but also the most time consuming. I would suggest tackling 20 sheets or so each day over a week. More than that and your hands will get VERY tired. To make the confetti, simply punch holes out of the paper, easy peasy!     Step Two: Next, cut the hearts from your vellum; you will need to cut double the number of confetti packs you hope to make.     Step Three: Once everything is cut, lay the hearts out and top every other one with a handful of confetti. Top the bottom half with another vellum heart.     Step Four: Hold one end of the heart and starting at the bottom, begin hand sewing around the other side with embroidery thread. Make about 7 stitches around. Do not sew these too tight and leave a decent length of thread at the bottom of each heart. Tie once at the bottom, in a lose knot. The idea is to keep the confetti in but to allow your guests to easily pull the thread right out.     Lay out your hearts with a note of instruction for guests to pull the thread and throw up their hearts when it is time. A beautiful shower of bright confetti and iridescent hearts awaits your finale.     Tip: Be sure to check with your venue before planning this project- not all venues allow you to throw confetti or rice. Happy hole punching!    

     

    0
  • Project Design By: Victoria Hudgins

    Photos By: Carly Taylor

    Using watercolor in your wedding can be an easy way to add both color and pretty artistic flair. Make drink tags, escort cards, or favor labels with these easy instructions.     Materials: You will need watercolor paints, paper tags, a white crayon, a paint brush and water.     Process: Write in your details on the paper tag with a white crayon. I did a combo of table numbers and simple words to show how each would look. Be sure to press firmly with the crayon.     A preview of the finished product. Loving this vibrant orange.     Dip your brush in the water and the paint, before stroking lightly over your tag.     Mix colors and do a couple coats to ensure good texture.
      The watercolors will not adhere to the wax portion of the tag where the crayon has left its mark.
      What a difference adding favor tags makes! Let dry and attach to your favor or item of choice!     Lastly, get creative and have fun!      Project Design By: Victoria Hudgins Photos By: Carly Taylor

     

    10
  • Photos By: Victoria Hudgins

    Paper marbling is a technique that has been around for a long time. The process leaves a beautiful impression on paper giving a high design style to invitations, gift tags and stationery. For your wedding why not take this traditional paper impact a little further by saturating your paint and marbling in a bold, modern and fresh way?     Materials: Heavy stock white paper, 2-3 colors of acrylic paints, a shallow pan and water.     Step One: Begin by dropping each of your paints into the water filled pan. Drip the paints in a straight line one at a time.     Step Two: Using a kitchen skewer, blend the paints together. When you do this some of the paint will rise to the top but (unlike normal marbling) the weight of the paint will allow a majority of it to remain on the bottom of the pan.     Step Three: Holding your paper on both ends make a U shape with it and set it in the water, bottom of the U first. This will prevent any air bubbles from ending up in your final design.     Step Four: Once the paper is entirely in the pan quickly take two fingers and push it toward the bottom of your pan. Swirl it around the bottom of the pan in a circular motion, this is where it picks up the bold saturation.     Step Five: Pull the paper out and let dry for 6-8 hours.     Once the paper is dry, cut it up for tags, seating cards or any other paper-based project you've dreamed up.       Project styling, design concept + photography by Victoria Hudgins    

     

    5
  • By: Jenny Batt

    Fringe is still everywhere and I don’t think it's going out of style anytime soon. Traditionally, you take tiny pieces of fringe and cover shapes and large paper mache objects. For this DIY, I will show you a new technique to breeze through fringing anything.     Materials: Tissue Paper Cutting Mat and Rotary Cutter Scissors (or fringing scissors – easier) Elmer’s Glue Poster Board   Step One Lay several sheets of tissue paper flat and fold in half lengthwise. Use your cutting mat, a straight edge and your rotary cutter, to cut strips 2.5” wide across the fold.     Step Two Take each set of strips and unfold. Refold lengthwise.     Step Three Fold in half widthwise and cut fringe on the bottom (not the folded) edge.     Step Four Separate each fringed strip and refold lengthwise. Take your poster board and across the short edge, run a thin bead of glue across the length. Lay a fringed piece across the glue and press lightly to adhere. If the strip isn’t quite long enough to reach, just add pieces as needed. For the next layer add another bead of glue above the first strip and add another strip.     Step Five Repeat until the entire poster board is covered. Let dry.     Step Six Print out letters from your computer. Cut out the letters from the paper. Place each letter on the fringed board, adjusting it so the fringe goes left to right across the letter, and cut loosely around the edge. Once you have the smaller piece, use the template to cut out the shape perfectly.     Step Seven Repeat with remaining letters. Sometimes after cutting, the tops of the letters are missing fringe. Simply add touch up pieces of tissue paper fringe and glue down. Let dry and trim.     Step Eight Use a bunting template to make a fun garland. You can use the fringed poster board to make any shapes you like or keep as is for a fun backdrop or to use as a tray liner. The fringing goes quickly using this method and is less tedious than fringing each shape individually.     Step Nine To make a garland from the letters, simply flip over the pieces and tape down to twine. Here I used washi tape so I can remove and adjust the letters easily after hanging.     photos by hankandhunt.com      
    4
  • Photos By: Chelsea Fuss

    How sweet would it be to have all of your guests sporting a colorful corsage! Here's how to create them.

    Materials: One stem per guest (carnations, roses and dendrobium orchids all work well for this project) Traditional paper florist ribbon Corsage pins A sign with instructions for guests     Directions:   1. Cut each stem down to one inch.   2. Tie ribbon around and trim the ends.     3. Secure with a corsage pin.     4. Arrange on a table cloth or tray with an extra dish of pins and a sign with instructions.     A tip: Prep the flowers the evening before and keep in the fridge until the event.     These corsages will make your guests feel special and will bring color to your photos!     Enjoy!

     

    5
  • Photo By Chelsea Fuss

    This centerpiece is stunning - mainly because of the vibrant blooms!      Materials: 10 red, white and pink anemones  5 mini daffodils 8 orange, red, and white ranunculus (better if blown open) Ranunculus greens and buds English daisies in pink and white (cut from 2 plants) Modern vase Rocks Chicken wire or a flower frog Clippers

    Directions:

    First, fill the vase with rocks half way up the vase. Fill with water. Start filling the vase with stems. The rocks will keep the flowers in place and help you create the shape of your flower arrangement.     Try to create an "s" shape with greens and lighter flowers cascading to the right and diagonally across at the bottom of the vase.     Place larger blossoms at the bottom of the arrangement and lighter smaller buds and greens towards the top.     We added a table number made from a simple number sticker purchased at a grocery/drygoods store...     ... and a painted horse for some humor!     Tip: To make this arrangement more budget friendly, substitute more greens for flowers. The recipe is made of spring flowers. For a summer or fall version substitute with: dahlias (the single petaled varieties would work great), iceland poppies, garden roses, peonies, california poppies, daisies, roses.   Photo By Chelsea Fuss
    5
  • Photos By: Chelsea Fuss

    Inspired by the sweet strawberry cakes that Swedes make during their Midsummer holiday each year, we came up with this festive wedding cake! It's perfect for an outdoor, rustic wedding. You can make the cake yourself, or simply embellish a store bought cake using our styling inspiration. It's easy and such a unique idea!

    First you'll need a white dome cake. We used a citrus flavor dome cake filled with whip cream, from a small family bakery, and it was delicious. We just took off the doily and cardboard it came on and slid it onto a rustic wooden board. You could also make your own. Here are instructions on how to make a dome cake.

    You will need around two pints of strawberries per cake.

    Cut the stems off and slice the strawberries in half.

    Lay the strawberries flat side down, all over the cake.

    Keep the cake in the fridge until just before the reception.

    Add edible wildflowers a few hours before your event. We used buckwheat, meadowsweet, and winter savory. The flavor of these flowers worked wonderfully with the citrus flavor of the cake!     We laid them all around the cake and sprinkled the petals and leaves on top of it. The more you add, the better it looks. Make sure the flowers you use are edible and have not been sprayed with pesticides!     More ideas for edible flowers: pansies violets nasturtium roses calendula     Display your cake on a rustic farm table and decorate with flowers around the bottom of the cake like in slide one. Your guests will love digging into this summery treat!    
    4
  • Photos by Jordan Ferney

      Supplies: 1. Metal Zinc Tray 14"x14"($10) 2. Wheat Grass Seeds($4)  3. Potting Soil ($8) 4. Gravel for Drainage     Step One: Put a layer of gravel to help with drainage. The metal tray we used did not have built in drainage so the gravel helps with that. Step Two: Put a layer of soil on top of the gravel, make sure you leave 1/2" of the metal vessel showing. Step Three: Put a generous layer of seeds down, make sure it is even up to the edges. Step Four: Cover the seeds with a .25" layer of soil. Pat down.     Step Five: Water the seeds with a gentle flow of water (either a watering can or a paper cup with holes punched in the bottom)so the seeds aren't washed around. Keep in a sunny area and water daily, keeping the soil moist. Grass should be ready 7-10 days after planting.     This gorgeous wheat grass is 14 days old.     The grass will eventually look overgrown so you'll want to test it in advance of the big day so you'll know what works best for you.     Wheat grass is an easy way to liven up a spring or summer event. You can use it for seating cards or even incorporate it into centerpieces.     For the seating cards, you will need the cards and popsicle sticks ( $2 from a craft store).     Wheat grass seeds can be bought at a health food store like Whole Foods. If after a week of growth you notice bare spots you can move the grass that is full around to cover it and give it a few days to grow in.     Voila! Your gorgeous DIY project is done!     This seating card display costs under $25.     Happy DIYing!

     

    4

Get Started!

Create inspiration boards, share ideas with your friends and wedding vendors, get feedback from brides like you, and lots more!

Have a question? Contact Support

Find Your Wedding Vendors

Featured Vendors Near You

Related Photos
Related Forums
What could be more fun than telling your friends and family that you made everything at your wedding yourself? Well, an entire Do it Yourself wedding ...

might be going a bit overboard, but Project Wedding has tons of DIY wedding ideas for you to implement for your big day.

Whether you can’t cut a straight line or you’re the next Martha Stewart, we have DIY wedding ideas for every type of bride. From DIY wedding favors to DIY wedding decorations to DIY wedding invitations, if you’re interested in doing it yourself, we can help! With so many unique images of wedding ideas we’ve found, plus all our great photos of real weddings, you’ll find the most DIY wedding ideas here.

From simple wrap and tie wedding favors to more complex origami wedding decorations – if we think you can make it, you’ll find it here. These DIY favors are guaranteed to thrill your guests without emptying your pockets. Even if you’re not very crafty, we still have some fast and easy project ideas that you might like. And if you have creative friends or relatives, chances are they will be more than happy to help you.

DIY weddings are a great way to put a personal touch on all of your wedding details. You can add your initials to your wedding favors, make a candy buffet that complements your wedding colors, or create a masterpiece that looks store bought but cost way less. Whatever your reason for wanting a Do it Yourself wedding, our articles will help make your dreams come to life.

With so many great DIY wedding ideas, all of your family, friends and honored wedding guests are guaranteed to remember how amazingly creative your wedding day was. Now go get crafty!