SHOW FILTERS
370

DIY Wedding Ideas

  •  

    by Jordan Ferney   Make a cute and easy display for your pinwheel escort cards. For this project, we used a pretty floral origami paper. Origami works great because there is a different pattern on the front than there is on the back.     Supplies for Pinwheels: 1. Floral Origami Paper $5 2. Dowels or Pencils (the pencils work well because you can use the eraser for the pin.) $4 3. Map Pins $4 4. Scissors 5. Strips of cardstock for names For the Display: 1. Flat wood $1/each 2. String 3. Drill and drill bits       Step One: Cut the origami paper in fourths. Step Two: Fold the small square corner to corner in both directions.       Step Three: Cut along the folded line 2/3 of the way toward the center on all four corners. Step Four: Now you are ready to pin. Take one corner of each cut section and pin them all in the middle of the square then add the strip of paper before pinning it all to a dowel or pencil.        Step Five: Depending on how many pinwheels you have, mark the flat wood piece with a pencil about 4" apart so you know where to drill the holes. The holes should be the exact size of the stick. We prefer it like that so you can put the pinwheel as high or low as you want and it will hold in place. Drill the holes along the pencil marks.     Step Six: Drill a small hole on each side for the string to go through. Step Seven: Put the string through the holes and tie knots an equal distance on each side to hold the wood in place.     Step Eight: Assemble pinwheels in the rack and hand from a bush or a wall. For a display rack, we got some flat wood in the dowel section of an art supply store and then just drilled holes the size of the pencils.     You can create pinwheels to fit any color palette.     This whole DIY goes pretty fast depending on how many pinwheels you need. We did this whole project for $17.     Your guests will just love them - see!?!  
    15
  •  

    Photo by: Carly Taylor   Looking for an extra special touch to give your programs or shower invites? Incorporating fabric can give you a beautiful way to showcase your wedding style and create a piece that is handcrafted.     After designing your wedding program, cut a piece of cardboard to the exact size of your program.     Cut your main fabric to the correct size of the cardboard previously cut, leaving an extra 1/4 inch around the entire square to fold over. Affix your fabric to the cardboard with a thin layer of fabric glue on each of the turned over sides.     Using coordinating fabric and ribbon, line one side of the program bringing in texture through pattern and color. Fold each piece over and attach to the back side with fabric glue.     Lastly, attach your program to the backside of the program using a very thin layer of fabric glue around the edges(it dries completely clear).     Get creative, incorporating your color palette or favorite patterns!     So pretty and festive!      
    4
  • Photos By: Chelsea Fuss

    You will need a chocolate cake recipe, along with an equally delicious recipe for chocolate ganache which we found here.     Ingredients for this yummy cake typically include unsweetened cocoa, buttermilk, flour, sugar, vanilla extract and baking soda.     For the ganache topping, make sure you have plenty of whipping creme and semisweet chocolate chips.     Always mix your ingredients together well and let sit for a bit!    

    Bundt cake pans. Each of these will serve approx. 5 guests. We like these.

    Tip: Make the cakes ahead of time and freeze them.

    The day of, pour chocolate ganache over the cakes and lift them onto some china plates.    
    4
  •  

    Project By: Victoria Hudgins Photos By: Prokopets Studios   Want to leave your ceremony in style? There is no better way to do it then under a canopy of flying confetti! Here is a fun way to present the confetti to your guests; be ready for a colorful shower of love!     Materials: Vellum paper, scissors, a small hole punch, embroidery thread, a needle and a stack of scrapbook paper in your color palette     Step One: The first step is to make the confetti, which is the easiest part but also the most time consuming. I would suggest tackling 20 sheets or so each day over a week. More than that and your hands will get VERY tired. To make the confetti, simply punch holes out of the paper, easy peasy!     Step Two: Next, cut the hearts from your vellum; you will need to cut double the number of confetti packs you hope to make.     Step Three: Once everything is cut, lay the hearts out and top every other one with a handful of confetti. Top the bottom half with another vellum heart.     Step Four: Hold one end of the heart and starting at the bottom, begin hand sewing around the other side with embroidery thread. Make about 7 stitches around. Do not sew these too tight and leave a decent length of thread at the bottom of each heart. Tie once at the bottom, in a lose knot. The idea is to keep the confetti in but to allow your guests to easily pull the thread right out.     Lay out your hearts with a note of instruction for guests to pull the thread and throw up their hearts when it is time. A beautiful shower of bright confetti and iridescent hearts awaits your finale.     Tip: Be sure to check with your venue before planning this project- not all venues allow you to throw confetti or rice. Happy hole punching!    

     

    1
  • Project and Photos By: Victoria Hudgins

    If embossing seems like a formality beyond your budget. Not to worry! It's a very easy craft to learn and will give your papers and packaging that polished look. This particular project shows embossed favors, but you can use the same tools to emboss your invitations, menus, programs, or save the dates!   You will need... A craft heater, available at most craft stores. A jar of embossing powder, which will last you through hundreds of favors boxes and other projects, a stamp in the words of your choice and a white stamp pad.     Step One: To emboss favor boxes, start by stamping the box with a very wet stamp. Take extra care to ensure the entire stamp has been covered before pressing down. You could use other colors but I love the look of embossing with white for a traditional wedding.     Step Two: Once the favor box is stamped sprinkle a generous amount of embossing powder on top of it.     Step Three: Use the heating tool to dry and heat the embossed word on your box top. It will bring pretty dimension to a simple statement.     Step Four: Tap the extra powder onto a sheet of paper for re-use!      
    15
  • Photos by Carly Taylor for Victoria Hudgins

    These sweet little kabuki streamers are the perfect way to aid the bride and groom in a colorful sendoff!     They're a festive solution for the finale of your party, when bubbles aren't desired and confetti is not allowed. They make a very bright and pretty showing and stay completely attached so there is no mess to pick up afterward.     Materials: Crepe paper streamers in three coordinating colors. Coordinating paper and scissors. A needle and thick thread for attaching. A heavy paperweight & a small piece of tape or label to close off the project when completed.   Directions:   1. Lay out all three colors of your streamers and cut each into 25 inch sections. You will need one cut section per streamer or each guest package.     2. Layer your streamer layers on top of one another, with all three colors and weigh down one side with a heavy paperweight   3. Begin to cut up your streamer section in thirds. You will make two cuts vertically up the streamers to leave you with three skinny sections.     4. Cut decorative paper into 2x4 inch pieces to use for wrapping the streamers.     5. Using a needle thread, thick string through your paper and tie off twice to produce a small finger loop. This will allow your guests to slip on the package for good throwing grip! You could also use ribbon for this step if desired.     6. Dab a bit if glue on the inside of the paper and attach one section (all three colors) of your skinny ribbon to the far left side. Repeat this step in the center and right side. You will end up with three sections, giving you a total of nine streamers to work with.       7. Secure your streamer paper under a weight and working one section at a time begin to roll up your streamers tightly toward the top. Roll each section separately and be sure to keep your streamers tight for small rolls.     8. Once all three sections are rolled up, finish off your package by securing the paper with a small label or tape.       Your guests will have a splendid showing of streamers to wave!      Project Design & Styling: Victoria Hudgins Photography: Carly Taylor
    1
  • Project & Story By: Chelsea Fuss 

    Photos By: Lisa Warninger 

    Canelé cakes originated in France, where they were popular starting in the 19th century. Today you can find them at most bakeries. The little cakes are about three inches tall with a caramelized crust, and a custard in the center. You can make your own or order them in bulk from a bakery. We've created a cute, modern packaging for a wedding favor.   Materials: Canelé cakes  bright tissue paper string  pinking shears white pen white round sticker

    Step One:

    Cut a 6" by 6" square of the tissue with pinking sheers (use two pieces per cake)

      Step Two: Write the name of the guest about 2 inches from the bottom of the paper. Once it's wrapped up it will look like the photo below.     Step Three: Roll the cake in the tissue and fold over the end of the paper onto the bottom of the cake.     Step Four: Secure with a sticker.     Step Five: Twist the top tissue and secure with string. Trim if necessary.    
    4
  • Photo By Chelsea Fuss

    This centerpiece is stunning - mainly because of the vibrant blooms!      Materials: 10 red, white and pink anemones  5 mini daffodils 8 orange, red, and white ranunculus (better if blown open) Ranunculus greens and buds English daisies in pink and white (cut from 2 plants) Modern vase Rocks Chicken wire or a flower frog Clippers

    Directions:

    First, fill the vase with rocks half way up the vase. Fill with water. Start filling the vase with stems. The rocks will keep the flowers in place and help you create the shape of your flower arrangement.     Try to create an "s" shape with greens and lighter flowers cascading to the right and diagonally across at the bottom of the vase.     Place larger blossoms at the bottom of the arrangement and lighter smaller buds and greens towards the top.     We added a table number made from a simple number sticker purchased at a grocery/drygoods store...     ... and a painted horse for some humor!     Tip: To make this arrangement more budget friendly, substitute more greens for flowers. The recipe is made of spring flowers. For a summer or fall version substitute with: dahlias (the single petaled varieties would work great), iceland poppies, garden roses, peonies, california poppies, daisies, roses.   Photo By Chelsea Fuss
    6
  • Photos by Jordan Ferney

      Supplies: 1. Metal Zinc Tray 14"x14"($10) 2. Wheat Grass Seeds($4)  3. Potting Soil ($8) 4. Gravel for Drainage     Step One: Put a layer of gravel to help with drainage. The metal tray we used did not have built in drainage so the gravel helps with that. Step Two: Put a layer of soil on top of the gravel, make sure you leave 1/2" of the metal vessel showing. Step Three: Put a generous layer of seeds down, make sure it is even up to the edges. Step Four: Cover the seeds with a .25" layer of soil. Pat down.     Step Five: Water the seeds with a gentle flow of water (either a watering can or a paper cup with holes punched in the bottom)so the seeds aren't washed around. Keep in a sunny area and water daily, keeping the soil moist. Grass should be ready 7-10 days after planting.     This gorgeous wheat grass is 14 days old.     The grass will eventually look overgrown so you'll want to test it in advance of the big day so you'll know what works best for you.     Wheat grass is an easy way to liven up a spring or summer event. You can use it for seating cards or even incorporate it into centerpieces.     For the seating cards, you will need the cards and popsicle sticks ( $2 from a craft store).     Wheat grass seeds can be bought at a health food store like Whole Foods. If after a week of growth you notice bare spots you can move the grass that is full around to cover it and give it a few days to grow in.     Voila! Your gorgeous DIY project is done!     This seating card display costs under $25.     Happy DIYing!

     

    4
  • Project By: Victoria Hudgins

    Photos By: Carly Taylor   Making a large expanse of wall connect with your wedding can be a hard task when working on a budget. Putting simple flowers up in an artistic array is the perfect solution.     This installation would be lovely behind a dessert bar, backing a ceremony, or on any wall where you'd like to add a bit of texture and style.     To create the floral wall you will need: A selection of florals that coordinate well with our day. Since you will only be using single stems, you could buy these on your own as a great way to save money.     You'll also need embroidery hoops, which are a cheap purchase at your local craft store, mine are each 10 inches, and tulle in a soft color to add texture and depth.     First, detach your embroidery hoop into two pieces and lay a piece of tulle over the bottom hoop.     The tulle needs to be cut about two inches larger than your hoop.  

    Arrange a few blooms in a pattern you find pleasing on the bottom tulle. It helps at this step to do your entire arrangement at once, giving you a chance to see how each small piece combines to make one beautiful artistic design.

    Once your blooms are in place, cover with a second layer of tulle, then place the inside hoop back into the piece. Doing this will pull your tulle taut. Secure by screwing the embroidery key until it is tight.

    Your flowers will stay perfect floating between the tight layers of tulle.

    Hang along your wall in whichever way your venue will allow.

    8
  •  

    by Jordan Ferney   Make a cute and easy display for your pinwheel escort cards. For this project, we used a pretty floral origami paper. Origami works great because there is a different pattern on the front than there is on the back.     Supplies for Pinwheels: 1. Floral Origami Paper $5 2. Dowels or Pencils (the pencils work well because you can use the eraser for the pin.) $4 3. Map Pins $4 4. Scissors 5. Strips of cardstock for names For the Display: 1. Flat wood $1/each 2. String 3. Drill and drill bits       Step One: Cut the origami paper in fourths. Step Two: Fold the small square corner to corner in both directions.       Step Three: Cut along the folded line 2/3 of the way toward the center on all four corners. Step Four: Now you are ready to pin. Take one corner of each cut section and pin them all in the middle of the square then add the strip of paper before pinning it all to a dowel or pencil.        Step Five: Depending on how many pinwheels you have, mark the flat wood piece with a pencil about 4" apart so you know where to drill the holes. The holes should be the exact size of the stick. We prefer it like that so you can put the pinwheel as high or low as you want and it will hold in place. Drill the holes along the pencil marks.     Step Six: Drill a small hole on each side for the string to go through. Step Seven: Put the string through the holes and tie knots an equal distance on each side to hold the wood in place.     Step Eight: Assemble pinwheels in the rack and hand from a bush or a wall. For a display rack, we got some flat wood in the dowel section of an art supply store and then just drilled holes the size of the pencils.     You can create pinwheels to fit any color palette.     This whole DIY goes pretty fast depending on how many pinwheels you need. We did this whole project for $17.     Your guests will just love them - see!?!  
    15
  •  

    Photo by: Carly Taylor   Looking for an extra special touch to give your programs or shower invites? Incorporating fabric can give you a beautiful way to showcase your wedding style and create a piece that is handcrafted.     After designing your wedding program, cut a piece of cardboard to the exact size of your program.     Cut your main fabric to the correct size of the cardboard previously cut, leaving an extra 1/4 inch around the entire square to fold over. Affix your fabric to the cardboard with a thin layer of fabric glue on each of the turned over sides.     Using coordinating fabric and ribbon, line one side of the program bringing in texture through pattern and color. Fold each piece over and attach to the back side with fabric glue.     Lastly, attach your program to the backside of the program using a very thin layer of fabric glue around the edges(it dries completely clear).     Get creative, incorporating your color palette or favorite patterns!     So pretty and festive!      
    4
  • Photos By: Chelsea Fuss

    You will need a chocolate cake recipe, along with an equally delicious recipe for chocolate ganache which we found here.     Ingredients for this yummy cake typically include unsweetened cocoa, buttermilk, flour, sugar, vanilla extract and baking soda.     For the ganache topping, make sure you have plenty of whipping creme and semisweet chocolate chips.     Always mix your ingredients together well and let sit for a bit!    

    Bundt cake pans. Each of these will serve approx. 5 guests. We like these.

    Tip: Make the cakes ahead of time and freeze them.

    The day of, pour chocolate ganache over the cakes and lift them onto some china plates.    
    4
  •  

    Project By: Victoria Hudgins Photos By: Prokopets Studios   Want to leave your ceremony in style? There is no better way to do it then under a canopy of flying confetti! Here is a fun way to present the confetti to your guests; be ready for a colorful shower of love!     Materials: Vellum paper, scissors, a small hole punch, embroidery thread, a needle and a stack of scrapbook paper in your color palette     Step One: The first step is to make the confetti, which is the easiest part but also the most time consuming. I would suggest tackling 20 sheets or so each day over a week. More than that and your hands will get VERY tired. To make the confetti, simply punch holes out of the paper, easy peasy!     Step Two: Next, cut the hearts from your vellum; you will need to cut double the number of confetti packs you hope to make.     Step Three: Once everything is cut, lay the hearts out and top every other one with a handful of confetti. Top the bottom half with another vellum heart.     Step Four: Hold one end of the heart and starting at the bottom, begin hand sewing around the other side with embroidery thread. Make about 7 stitches around. Do not sew these too tight and leave a decent length of thread at the bottom of each heart. Tie once at the bottom, in a lose knot. The idea is to keep the confetti in but to allow your guests to easily pull the thread right out.     Lay out your hearts with a note of instruction for guests to pull the thread and throw up their hearts when it is time. A beautiful shower of bright confetti and iridescent hearts awaits your finale.     Tip: Be sure to check with your venue before planning this project- not all venues allow you to throw confetti or rice. Happy hole punching!    

     

    1
  • Project and Photos By: Victoria Hudgins

    If embossing seems like a formality beyond your budget. Not to worry! It's a very easy craft to learn and will give your papers and packaging that polished look. This particular project shows embossed favors, but you can use the same tools to emboss your invitations, menus, programs, or save the dates!   You will need... A craft heater, available at most craft stores. A jar of embossing powder, which will last you through hundreds of favors boxes and other projects, a stamp in the words of your choice and a white stamp pad.     Step One: To emboss favor boxes, start by stamping the box with a very wet stamp. Take extra care to ensure the entire stamp has been covered before pressing down. You could use other colors but I love the look of embossing with white for a traditional wedding.     Step Two: Once the favor box is stamped sprinkle a generous amount of embossing powder on top of it.     Step Three: Use the heating tool to dry and heat the embossed word on your box top. It will bring pretty dimension to a simple statement.     Step Four: Tap the extra powder onto a sheet of paper for re-use!      
    15
  • Photos by Carly Taylor for Victoria Hudgins

    These sweet little kabuki streamers are the perfect way to aid the bride and groom in a colorful sendoff!     They're a festive solution for the finale of your party, when bubbles aren't desired and confetti is not allowed. They make a very bright and pretty showing and stay completely attached so there is no mess to pick up afterward.     Materials: Crepe paper streamers in three coordinating colors. Coordinating paper and scissors. A needle and thick thread for attaching. A heavy paperweight & a small piece of tape or label to close off the project when completed.   Directions:   1. Lay out all three colors of your streamers and cut each into 25 inch sections. You will need one cut section per streamer or each guest package.     2. Layer your streamer layers on top of one another, with all three colors and weigh down one side with a heavy paperweight   3. Begin to cut up your streamer section in thirds. You will make two cuts vertically up the streamers to leave you with three skinny sections.     4. Cut decorative paper into 2x4 inch pieces to use for wrapping the streamers.     5. Using a needle thread, thick string through your paper and tie off twice to produce a small finger loop. This will allow your guests to slip on the package for good throwing grip! You could also use ribbon for this step if desired.     6. Dab a bit if glue on the inside of the paper and attach one section (all three colors) of your skinny ribbon to the far left side. Repeat this step in the center and right side. You will end up with three sections, giving you a total of nine streamers to work with.       7. Secure your streamer paper under a weight and working one section at a time begin to roll up your streamers tightly toward the top. Roll each section separately and be sure to keep your streamers tight for small rolls.     8. Once all three sections are rolled up, finish off your package by securing the paper with a small label or tape.       Your guests will have a splendid showing of streamers to wave!      Project Design & Styling: Victoria Hudgins Photography: Carly Taylor
    1
  • Project & Story By: Chelsea Fuss 

    Photos By: Lisa Warninger 

    Canelé cakes originated in France, where they were popular starting in the 19th century. Today you can find them at most bakeries. The little cakes are about three inches tall with a caramelized crust, and a custard in the center. You can make your own or order them in bulk from a bakery. We've created a cute, modern packaging for a wedding favor.   Materials: Canelé cakes  bright tissue paper string  pinking shears white pen white round sticker

    Step One:

    Cut a 6" by 6" square of the tissue with pinking sheers (use two pieces per cake)

      Step Two: Write the name of the guest about 2 inches from the bottom of the paper. Once it's wrapped up it will look like the photo below.     Step Three: Roll the cake in the tissue and fold over the end of the paper onto the bottom of the cake.     Step Four: Secure with a sticker.     Step Five: Twist the top tissue and secure with string. Trim if necessary.    
    4
  • Photo By Chelsea Fuss

    This centerpiece is stunning - mainly because of the vibrant blooms!      Materials: 10 red, white and pink anemones  5 mini daffodils 8 orange, red, and white ranunculus (better if blown open) Ranunculus greens and buds English daisies in pink and white (cut from 2 plants) Modern vase Rocks Chicken wire or a flower frog Clippers

    Directions:

    First, fill the vase with rocks half way up the vase. Fill with water. Start filling the vase with stems. The rocks will keep the flowers in place and help you create the shape of your flower arrangement.     Try to create an "s" shape with greens and lighter flowers cascading to the right and diagonally across at the bottom of the vase.     Place larger blossoms at the bottom of the arrangement and lighter smaller buds and greens towards the top.     We added a table number made from a simple number sticker purchased at a grocery/drygoods store...     ... and a painted horse for some humor!     Tip: To make this arrangement more budget friendly, substitute more greens for flowers. The recipe is made of spring flowers. For a summer or fall version substitute with: dahlias (the single petaled varieties would work great), iceland poppies, garden roses, peonies, california poppies, daisies, roses.   Photo By Chelsea Fuss
    6
  • Photos by Jordan Ferney

      Supplies: 1. Metal Zinc Tray 14"x14"($10) 2. Wheat Grass Seeds($4)  3. Potting Soil ($8) 4. Gravel for Drainage     Step One: Put a layer of gravel to help with drainage. The metal tray we used did not have built in drainage so the gravel helps with that. Step Two: Put a layer of soil on top of the gravel, make sure you leave 1/2" of the metal vessel showing. Step Three: Put a generous layer of seeds down, make sure it is even up to the edges. Step Four: Cover the seeds with a .25" layer of soil. Pat down.     Step Five: Water the seeds with a gentle flow of water (either a watering can or a paper cup with holes punched in the bottom)so the seeds aren't washed around. Keep in a sunny area and water daily, keeping the soil moist. Grass should be ready 7-10 days after planting.     This gorgeous wheat grass is 14 days old.     The grass will eventually look overgrown so you'll want to test it in advance of the big day so you'll know what works best for you.     Wheat grass is an easy way to liven up a spring or summer event. You can use it for seating cards or even incorporate it into centerpieces.     For the seating cards, you will need the cards and popsicle sticks ( $2 from a craft store).     Wheat grass seeds can be bought at a health food store like Whole Foods. If after a week of growth you notice bare spots you can move the grass that is full around to cover it and give it a few days to grow in.     Voila! Your gorgeous DIY project is done!     This seating card display costs under $25.     Happy DIYing!

     

    4
  • Project By: Victoria Hudgins

    Photos By: Carly Taylor   Making a large expanse of wall connect with your wedding can be a hard task when working on a budget. Putting simple flowers up in an artistic array is the perfect solution.     This installation would be lovely behind a dessert bar, backing a ceremony, or on any wall where you'd like to add a bit of texture and style.     To create the floral wall you will need: A selection of florals that coordinate well with our day. Since you will only be using single stems, you could buy these on your own as a great way to save money.     You'll also need embroidery hoops, which are a cheap purchase at your local craft store, mine are each 10 inches, and tulle in a soft color to add texture and depth.     First, detach your embroidery hoop into two pieces and lay a piece of tulle over the bottom hoop.     The tulle needs to be cut about two inches larger than your hoop.  

    Arrange a few blooms in a pattern you find pleasing on the bottom tulle. It helps at this step to do your entire arrangement at once, giving you a chance to see how each small piece combines to make one beautiful artistic design.

    Once your blooms are in place, cover with a second layer of tulle, then place the inside hoop back into the piece. Doing this will pull your tulle taut. Secure by screwing the embroidery key until it is tight.

    Your flowers will stay perfect floating between the tight layers of tulle.

    Hang along your wall in whichever way your venue will allow.

    8

Get Started!

Create inspiration boards, share ideas with your friends and wedding vendors, get feedback from brides like you, and lots more!

Have a question? Contact Support

Find Your Wedding Vendors

Featured Vendors Near You

Related Photos
Related Forums
What could be more fun than telling your friends and family that you made everything at your wedding yourself? Well, an entire Do it Yourself wedding ...

might be going a bit overboard, but Project Wedding has tons of DIY wedding ideas for you to implement for your big day.

Whether you can’t cut a straight line or you’re the next Martha Stewart, we have DIY wedding ideas for every type of bride. From DIY wedding favors to DIY wedding decorations to DIY wedding invitations, if you’re interested in doing it yourself, we can help! With so many unique images of wedding ideas we’ve found, plus all our great photos of real weddings, you’ll find the most DIY wedding ideas here.

From simple wrap and tie wedding favors to more complex origami wedding decorations – if we think you can make it, you’ll find it here. These DIY favors are guaranteed to thrill your guests without emptying your pockets. Even if you’re not very crafty, we still have some fast and easy project ideas that you might like. And if you have creative friends or relatives, chances are they will be more than happy to help you.

DIY weddings are a great way to put a personal touch on all of your wedding details. You can add your initials to your wedding favors, make a candy buffet that complements your wedding colors, or create a masterpiece that looks store bought but cost way less. Whatever your reason for wanting a Do it Yourself wedding, our articles will help make your dreams come to life.

With so many great DIY wedding ideas, all of your family, friends and honored wedding guests are guaranteed to remember how amazingly creative your wedding day was. Now go get crafty!