SHOW FILTERS
342

DIY Wedding Ideas

  • Photos By: Jordan Ferney

    This project is super simple and very inexpensive. In the end, your guest will have an adorable little personalized vase with her name in a pretty font! The best part is- if you can get the jars for free- its pretty much just the cost of the flowers and a $5 paint pen. So great!

    Materials: Glass Jars (we used French yogurt jars but baby food jars would work great.) Wire (if you are going to hang them) Wirecutters Very Fine Paint Pen for glass (can be bought at a craft store.) Tape A list of your guests names printed out 2" in width. We used the font Lobster. Flowers

    Step One:   Make sure your jars are clean. Then tape the name you want to trace against the inside of the glass jar.     Step Two:   Taking the fine point glass pen, trace the name.  

    Step Three:   Remove the paper, then touch up any spots that need it.     Step Four:   If using as an escort card, write in the table number.     Step Five:   Add some flowers to each jar and display them on a table!     Display Ideas:   You can also display the vases on a wall or bush. If you go with this option, just add some wire to hang it.    

     

    23
  •  

    By ohhappyday.com   This is for those brides that have figured out a great favor to give, but need some packaging to make it pretty.     I prefer making the tassels out of crepe paper versus tissue paper because there is no glue needed and the crepe paper takes about five seconds to shape while the tissue paper takes a lot of time to "poof." These are really easy and really affordable to make. Here's how!   Materials: Folds of Crepe Paper Scissors Chinese Take Out Containers

    Step One Take a section of crepe paper that is folded in half (about 5" long when folded) and cut off very thin "sections."     Step Two Put two or three of the "sections" together (you'll want to test a few to get it the right thickness depending on the paper) and twist tightly starting in the middle.     Step Three When the middle section gets twisted enough let it naturally loop and begin twisting the crepe paper around itself (If you are attaching it to the wire handles you'll need to wrap it around before you twist.)     Tip no. 1 The stretchiness in the crepe paper will help it hold and stay tight.     Tip no. 2 The fewer sections the better it will hold. You should find the happy medium between making sure it holds tight and having a nice amount of thickness.     Step Four Very lightly "crunch" the tassle in your hand to give it a little body and trim it with scissors to even it out.      
    1
  • Photos By Chelsea Fuss

      Materials: Four bunches of daffodils: use different colors and flowers that are at different stages. The paperwhite daffodil, "Grand Soleil d'Or" has small petals and gives the bouquet the wild feel. String Scissors and/or clippers Suslin or cotton     Directions: 1. Remove the leaves from the daffodils and separate the flowers and leaves into piles.     2. Grab a few stems of flowers and hold in your left hand if you are right-handed and right hand if you are left-handed.     3. Alternate, adding flowers and leaves. Each time you add another bunch, turn the bouquet.   4. Once you like how it looks, trim the stems and tie the bouquet together with a string.     5. Cut into a piece of cotton muslin just an inch and then tear a 1" x 12" long piece.   6. Tie the bouquet together with the cotton.     Tip: Daffodils don't like to have their stems cut a lot and will exude a sticky substance. Try to just cut them once and keep them in a cold, dark place until ready for use.     Photos By Chelsea Fuss
    3
  •  

    Photos/Project By: Victoria Hudgins   Using fresh or dried herbs is a wonderful and economical way to bring a seasonal touch to your wedding. Lavender is my favorite dried herb to use because it is easy to work with, affordable, and smells amazing. Here's how I made these simple lavender escort cards!
        Collect a bunch of lavender and hang upside down to dry out. Or, purchase dried lavender from a local florist or home store.     Use simple white escort cards and write in names and table numbers for your guests.     Using an exacto knife, slice two small horizontal holes at the top of each card.     Thread your lavender through the holes, cutting off any excess stem at the end.     Since the herbs are dried, you can complete this project well before your wedding day.     Place bunches of lavender on the display table for added décor.      
    12
  •  

    Photos By: Victoria Hudgins   Give your cake, signature cocktail or desserts a bit of bling with these easy-to-make toppers. They can be made in miniature for individual servings, in large form for a cake or in a stack of sizes for a substantial presentation (my favorite)!     You will need: textured gold ribbon liquid fabric stiffener binder clips or clothespins wax paper a small craft hole punch lollipop sticks     First, cut the ribbon at increments double the size of the heart you'd like to make.     Fold the ribbon segment in half and dredge into the liquid fabric stiffener (do not use the spray, it must be liquid for thorough saturation).     While the ribbon is still wet, mold into shape and clip the top edges of the heart together. Lay the newly formed hearts out to dry on wax paper. It helps to gently move the hearts every few hours while they dry so that you don't end up with a puddle of film to remove afterwards.     Once dry, remove the clips. Use a small craft hole punch (a regular, household punch will be too large) to make a hole at the bottom of each heart. Gently insert a lollipop stick into the hole to finish the topper off.     Place this fabulous embellishment on your cake, dessert minis, or in a drink for a pretty display!      

     

    6
  • Photos By: Brittni Mehlhoff   A festive accent for a springtime bridal shower or Easter weekend wedding     Materials hollow decorative eggs or blown eggs, needle and thread or string, hydrangeas, scissors, awl     Step One Using an awl, carefully pierce all the way through the surface of your egg, about one inch from the top. This will make it much easier to get the string through.     Step Two Thread your string through a needle and guide the needle through the poked holes on the egg.     Step Three Continue steps one and two with additional eggs to create the desired length.     Step Four Once you have added all the eggs, you can begin adding the hydrangeas. Move the eggs 1-2 inches apart from one other on the garland string to make room for the flowers. Cut short trimming from a large hydrangea stem and attach to the garland after every egg or two with an extra piece of string.     Step Five Push the eggs back together between the hydrangeas if necessary. Repeat until entire garland is covered. Add a knot on each side of the finished strand and you are ready to hang.     Use these pretty, pastel strands as garlands that flank the aisles of your spring ceremony or as a hanging backdrop for guests to admire at the reception.    
    1
  • Project and Photos By: Jenny Batt of Hank and Hunt   I found these tiny glass domes the other day and instantly thought of doing something for the couple who loves to travel. These charming little domes are pretty enough to set on a windowsill, where they will remind your guests every time they pass by.     Supplies: moss cloth glass domes wood dowels heavy duty or kitchen scissors hot glue gun white cardstock cardboard     Step One: On your computer, design and print three signs. I used the Bebas Neue font (download it for free here) at 12pt. I typed the initials of the bride and groom, "save the date" and the date to be saved. Space each group about 1.5" to 2" apart. Add as many to a sheet as you like. Cut out each group, for ease, and cut each into small strips. Cut one end of each strip into a point. Remember to cut the point to the opposite direction for the middle sign, here it was the "save the date" sign.     Step Two: Next, cut each dowel into 4 even pieces, about 3" long.     Step Three: Trace the bottom of the glass dome on a piece of paper. Use this to cut circles from the cardboard.     Step Four: Hot glue each dowel to the center of the cardboard base. Be sure to hold the dowel up straight until cool.     Step Five: Test where you would like the signs to go on the dowel and add three small drops of hot glue to attach the signs.     Tip: Add the signs at slightly off angles to get the real post effect.     Step Six: Use your circle template to cut rounds of the moss cloth. Cut slightly inside the traced line to make sure the moss fits inside the glass dome.     Step Seven: Cut a slit halfway through the moss circle. Place circle on cardboard round, around the post. Check to make sure it fits with the dome on top. If not, retrim slightly until it does. Hot glue each side of the moss down to the cardboard base.     Step Eight: Run a thin bead of glue around the outside of the moss on the cardboard base and immediately add the glass dome and press down.     Step Eight (Cont). Hold until cool. Repeat with remaining domes.     These are pretty sturdy and fit in small boxes; be sure to pack with lots of paper crinkle to mail them.     They would also be fun to hand deliver for a small local wedding.     Consider making these as favors or escort cards instead, just change what is written on the sign!
    4
  •  

    Project & Photos By: Brittni Mehlhoff   Make a small, natural ring pillow perfect for the tiny hands that will be carrying your precious cargo down the aisle!  

    Materials: Sheets of Moss, Floral Foam or Regular Styrofoam Brick, Knife, Floral Pins, Ribbon, Craft Glue, Scissors

    Step One: Cut foam brick in half to create a square and begin cutting the square down to desired shape. Slice off edges to make it less blocky and more of a pillow shape.

    Step Two: Cut a piece of moss based on the size of your foam block and begin wrapping it around the foam. Secure the moss to the foam using floral pins.

    Step Three: Once the moss is secure on all sides, cover up any floral pins that are showing by gluing very small pieces of moss overtop. 

    Step Four: Cut a piece of ribbon or fabric scrap to roughly twelve inches in length. At the six inch mark, fasten the ribbon to the center of the moss pillow with a dab of glue and a floral pin.

    Step Five: Secure your rings by sliding them thru the ribbon and tying a knot!

    4
  • Photos By: Chelsea Fuss

    Oragami Paper Cranes:

    It's stated in Japanese tradition that if you make one thousand cranes, your wish will come true! You don't have to make a thousand for a beautiful impact, though. Once you make a few, they go quickly. Invite some friends over to create this super sweet decoration for your big day.

    Step One: Cut a 5 x 5 square of paper and start with the patterned or colored side up. Fold in half with colored side in, then open back up.     Step Two: Rotate the paper to the right and fold in half again so that your folds mark an X in the middle of the paper.     Step Three: Place paper so it's a diamond and one point is pointing towards you.     Step Four: Fold the diamond in half.     Step Five: Open the paper up. Fold the right corner so it is tucked under and so it's lined up in the center. Do the same for the other side so you have a diamond.     Step Six: Take the right corner of the first layer and fold into the center so that the middle looks like a kite. Do the same with the left corner.     Step Seven: Fold the top of the kite towards you, so the top of the paper is flat.     Step Eight: Open back up and repeat Steps Six and Seven on the opposite side.     Step Nine: Open up the center and press flat.     Step Ten: Turn over and repeat Step Nine on the opposite side.     Step Eleven: Take the 1st layer, right corner and fold to the center. Repeat this with the left corner. Flip over and repeat.     Step Twelve: Now you should have two skinny sections that are the tail and head.     Step Thirteen: Take the bottom right tip and fold to the side. Make it even with the point on the side of the crane. Repeat on other side.     Step Fourteen: Fold the tip of one of the "legs." This is the crane's head.     Step Fifteen: Grab the wings and pull the bird open. There should be a flat square in the center.

    Use these pretty birds as escort cards, favors or table decorations! You can also string them and hang them from a tree or the ceiling.

    9
  • Project and Photos By: Brittni Mehlhoff

    With the holidays right around the corner, discarded Christmas tree trimmings are a dime a dozen. Using this extremely inexpensive, and often times free, material as greenery for a holiday wedding is a festive way to say I do.

     

    If you're hoping to incorporate this idea in some small way, boutonnières are the perfect fit. Give a nod to the holiday without going over the top and add a personal touch with custom monogrammed pendants your wedding party will cherish.     Supplies: Small florals (assorted) Christmas tree trimmings Scissors Washi Tape Oven Bake Clay Small Letter Stamps String Small 1/2 inch Metal Circle Cutter

    1. Start with two or three short branch shoots from the tree (about 4-5 inches long) and remove the needles from the bottom third of each stem.     2. Begin adding additional flowers until you've reached desired fullness.       3. Wrap the end of the stems together with washi tape, leaving the stems exposed at the bottom.     4. You can fill a short glass with a little water to keep the boutonnières fresh until the wedding (depending on the flowers you use, they should stay fresh this way for at least two days).   5. Now it's time to make your monogramed pendant. Roll out a small piece of clay to about 1/4 inch in thickness.     6. Cut the circle shape from the clay.     7. Stamp your pendant with the first letter of your groom's or groomsman's first name (or last name if you'd prefer).     8. Poke a hole through the pendant at the top and bake in the oven according to directions.     9. String the pendant up and attach to the boutonnière with washi tape.     10. Add a straight pin and they are ready for your groom and groomsmen on the big day.    

     

    Project and Photos By: Brittni Mehlhoff

    3
  • Photos By: Jordan Ferney

    This project is super simple and very inexpensive. In the end, your guest will have an adorable little personalized vase with her name in a pretty font! The best part is- if you can get the jars for free- its pretty much just the cost of the flowers and a $5 paint pen. So great!

    Materials: Glass Jars (we used French yogurt jars but baby food jars would work great.) Wire (if you are going to hang them) Wirecutters Very Fine Paint Pen for glass (can be bought at a craft store.) Tape A list of your guests names printed out 2" in width. We used the font Lobster. Flowers

    Step One:   Make sure your jars are clean. Then tape the name you want to trace against the inside of the glass jar.     Step Two:   Taking the fine point glass pen, trace the name.  

    Step Three:   Remove the paper, then touch up any spots that need it.     Step Four:   If using as an escort card, write in the table number.     Step Five:   Add some flowers to each jar and display them on a table!     Display Ideas:   You can also display the vases on a wall or bush. If you go with this option, just add some wire to hang it.    

     

    23
  •  

    By ohhappyday.com   This is for those brides that have figured out a great favor to give, but need some packaging to make it pretty.     I prefer making the tassels out of crepe paper versus tissue paper because there is no glue needed and the crepe paper takes about five seconds to shape while the tissue paper takes a lot of time to "poof." These are really easy and really affordable to make. Here's how!   Materials: Folds of Crepe Paper Scissors Chinese Take Out Containers

    Step One Take a section of crepe paper that is folded in half (about 5" long when folded) and cut off very thin "sections."     Step Two Put two or three of the "sections" together (you'll want to test a few to get it the right thickness depending on the paper) and twist tightly starting in the middle.     Step Three When the middle section gets twisted enough let it naturally loop and begin twisting the crepe paper around itself (If you are attaching it to the wire handles you'll need to wrap it around before you twist.)     Tip no. 1 The stretchiness in the crepe paper will help it hold and stay tight.     Tip no. 2 The fewer sections the better it will hold. You should find the happy medium between making sure it holds tight and having a nice amount of thickness.     Step Four Very lightly "crunch" the tassle in your hand to give it a little body and trim it with scissors to even it out.      
    1
  • Photos By Chelsea Fuss

      Materials: Four bunches of daffodils: use different colors and flowers that are at different stages. The paperwhite daffodil, "Grand Soleil d'Or" has small petals and gives the bouquet the wild feel. String Scissors and/or clippers Suslin or cotton     Directions: 1. Remove the leaves from the daffodils and separate the flowers and leaves into piles.     2. Grab a few stems of flowers and hold in your left hand if you are right-handed and right hand if you are left-handed.     3. Alternate, adding flowers and leaves. Each time you add another bunch, turn the bouquet.   4. Once you like how it looks, trim the stems and tie the bouquet together with a string.     5. Cut into a piece of cotton muslin just an inch and then tear a 1" x 12" long piece.   6. Tie the bouquet together with the cotton.     Tip: Daffodils don't like to have their stems cut a lot and will exude a sticky substance. Try to just cut them once and keep them in a cold, dark place until ready for use.     Photos By Chelsea Fuss
    3
  •  

    Photos/Project By: Victoria Hudgins   Using fresh or dried herbs is a wonderful and economical way to bring a seasonal touch to your wedding. Lavender is my favorite dried herb to use because it is easy to work with, affordable, and smells amazing. Here's how I made these simple lavender escort cards!
        Collect a bunch of lavender and hang upside down to dry out. Or, purchase dried lavender from a local florist or home store.     Use simple white escort cards and write in names and table numbers for your guests.     Using an exacto knife, slice two small horizontal holes at the top of each card.     Thread your lavender through the holes, cutting off any excess stem at the end.     Since the herbs are dried, you can complete this project well before your wedding day.     Place bunches of lavender on the display table for added décor.      
    12
  •  

    Photos By: Victoria Hudgins   Give your cake, signature cocktail or desserts a bit of bling with these easy-to-make toppers. They can be made in miniature for individual servings, in large form for a cake or in a stack of sizes for a substantial presentation (my favorite)!     You will need: textured gold ribbon liquid fabric stiffener binder clips or clothespins wax paper a small craft hole punch lollipop sticks     First, cut the ribbon at increments double the size of the heart you'd like to make.     Fold the ribbon segment in half and dredge into the liquid fabric stiffener (do not use the spray, it must be liquid for thorough saturation).     While the ribbon is still wet, mold into shape and clip the top edges of the heart together. Lay the newly formed hearts out to dry on wax paper. It helps to gently move the hearts every few hours while they dry so that you don't end up with a puddle of film to remove afterwards.     Once dry, remove the clips. Use a small craft hole punch (a regular, household punch will be too large) to make a hole at the bottom of each heart. Gently insert a lollipop stick into the hole to finish the topper off.     Place this fabulous embellishment on your cake, dessert minis, or in a drink for a pretty display!      

     

    6
  • Photos By: Brittni Mehlhoff   A festive accent for a springtime bridal shower or Easter weekend wedding     Materials hollow decorative eggs or blown eggs, needle and thread or string, hydrangeas, scissors, awl     Step One Using an awl, carefully pierce all the way through the surface of your egg, about one inch from the top. This will make it much easier to get the string through.     Step Two Thread your string through a needle and guide the needle through the poked holes on the egg.     Step Three Continue steps one and two with additional eggs to create the desired length.     Step Four Once you have added all the eggs, you can begin adding the hydrangeas. Move the eggs 1-2 inches apart from one other on the garland string to make room for the flowers. Cut short trimming from a large hydrangea stem and attach to the garland after every egg or two with an extra piece of string.     Step Five Push the eggs back together between the hydrangeas if necessary. Repeat until entire garland is covered. Add a knot on each side of the finished strand and you are ready to hang.     Use these pretty, pastel strands as garlands that flank the aisles of your spring ceremony or as a hanging backdrop for guests to admire at the reception.    
    1
  • Project and Photos By: Jenny Batt of Hank and Hunt   I found these tiny glass domes the other day and instantly thought of doing something for the couple who loves to travel. These charming little domes are pretty enough to set on a windowsill, where they will remind your guests every time they pass by.     Supplies: moss cloth glass domes wood dowels heavy duty or kitchen scissors hot glue gun white cardstock cardboard     Step One: On your computer, design and print three signs. I used the Bebas Neue font (download it for free here) at 12pt. I typed the initials of the bride and groom, "save the date" and the date to be saved. Space each group about 1.5" to 2" apart. Add as many to a sheet as you like. Cut out each group, for ease, and cut each into small strips. Cut one end of each strip into a point. Remember to cut the point to the opposite direction for the middle sign, here it was the "save the date" sign.     Step Two: Next, cut each dowel into 4 even pieces, about 3" long.     Step Three: Trace the bottom of the glass dome on a piece of paper. Use this to cut circles from the cardboard.     Step Four: Hot glue each dowel to the center of the cardboard base. Be sure to hold the dowel up straight until cool.     Step Five: Test where you would like the signs to go on the dowel and add three small drops of hot glue to attach the signs.     Tip: Add the signs at slightly off angles to get the real post effect.     Step Six: Use your circle template to cut rounds of the moss cloth. Cut slightly inside the traced line to make sure the moss fits inside the glass dome.     Step Seven: Cut a slit halfway through the moss circle. Place circle on cardboard round, around the post. Check to make sure it fits with the dome on top. If not, retrim slightly until it does. Hot glue each side of the moss down to the cardboard base.     Step Eight: Run a thin bead of glue around the outside of the moss on the cardboard base and immediately add the glass dome and press down.     Step Eight (Cont). Hold until cool. Repeat with remaining domes.     These are pretty sturdy and fit in small boxes; be sure to pack with lots of paper crinkle to mail them.     They would also be fun to hand deliver for a small local wedding.     Consider making these as favors or escort cards instead, just change what is written on the sign!
    4
  •  

    Project & Photos By: Brittni Mehlhoff   Make a small, natural ring pillow perfect for the tiny hands that will be carrying your precious cargo down the aisle!  

    Materials: Sheets of Moss, Floral Foam or Regular Styrofoam Brick, Knife, Floral Pins, Ribbon, Craft Glue, Scissors

    Step One: Cut foam brick in half to create a square and begin cutting the square down to desired shape. Slice off edges to make it less blocky and more of a pillow shape.

    Step Two: Cut a piece of moss based on the size of your foam block and begin wrapping it around the foam. Secure the moss to the foam using floral pins.

    Step Three: Once the moss is secure on all sides, cover up any floral pins that are showing by gluing very small pieces of moss overtop. 

    Step Four: Cut a piece of ribbon or fabric scrap to roughly twelve inches in length. At the six inch mark, fasten the ribbon to the center of the moss pillow with a dab of glue and a floral pin.

    Step Five: Secure your rings by sliding them thru the ribbon and tying a knot!

    4
  • Photos By: Chelsea Fuss

    Oragami Paper Cranes:

    It's stated in Japanese tradition that if you make one thousand cranes, your wish will come true! You don't have to make a thousand for a beautiful impact, though. Once you make a few, they go quickly. Invite some friends over to create this super sweet decoration for your big day.

    Step One: Cut a 5 x 5 square of paper and start with the patterned or colored side up. Fold in half with colored side in, then open back up.     Step Two: Rotate the paper to the right and fold in half again so that your folds mark an X in the middle of the paper.     Step Three: Place paper so it's a diamond and one point is pointing towards you.     Step Four: Fold the diamond in half.     Step Five: Open the paper up. Fold the right corner so it is tucked under and so it's lined up in the center. Do the same for the other side so you have a diamond.     Step Six: Take the right corner of the first layer and fold into the center so that the middle looks like a kite. Do the same with the left corner.     Step Seven: Fold the top of the kite towards you, so the top of the paper is flat.     Step Eight: Open back up and repeat Steps Six and Seven on the opposite side.     Step Nine: Open up the center and press flat.     Step Ten: Turn over and repeat Step Nine on the opposite side.     Step Eleven: Take the 1st layer, right corner and fold to the center. Repeat this with the left corner. Flip over and repeat.     Step Twelve: Now you should have two skinny sections that are the tail and head.     Step Thirteen: Take the bottom right tip and fold to the side. Make it even with the point on the side of the crane. Repeat on other side.     Step Fourteen: Fold the tip of one of the "legs." This is the crane's head.     Step Fifteen: Grab the wings and pull the bird open. There should be a flat square in the center.

    Use these pretty birds as escort cards, favors or table decorations! You can also string them and hang them from a tree or the ceiling.

    9
  • Project and Photos By: Brittni Mehlhoff

    With the holidays right around the corner, discarded Christmas tree trimmings are a dime a dozen. Using this extremely inexpensive, and often times free, material as greenery for a holiday wedding is a festive way to say I do.

     

    If you're hoping to incorporate this idea in some small way, boutonnières are the perfect fit. Give a nod to the holiday without going over the top and add a personal touch with custom monogrammed pendants your wedding party will cherish.     Supplies: Small florals (assorted) Christmas tree trimmings Scissors Washi Tape Oven Bake Clay Small Letter Stamps String Small 1/2 inch Metal Circle Cutter

    1. Start with two or three short branch shoots from the tree (about 4-5 inches long) and remove the needles from the bottom third of each stem.     2. Begin adding additional flowers until you've reached desired fullness.       3. Wrap the end of the stems together with washi tape, leaving the stems exposed at the bottom.     4. You can fill a short glass with a little water to keep the boutonnières fresh until the wedding (depending on the flowers you use, they should stay fresh this way for at least two days).   5. Now it's time to make your monogramed pendant. Roll out a small piece of clay to about 1/4 inch in thickness.     6. Cut the circle shape from the clay.     7. Stamp your pendant with the first letter of your groom's or groomsman's first name (or last name if you'd prefer).     8. Poke a hole through the pendant at the top and bake in the oven according to directions.     9. String the pendant up and attach to the boutonnière with washi tape.     10. Add a straight pin and they are ready for your groom and groomsmen on the big day.    

     

    Project and Photos By: Brittni Mehlhoff

    3

Get Started!

Create inspiration boards, share ideas with your friends and wedding vendors, get feedback from brides like you, and lots more!

Have a question? Contact Support

Find Your Wedding Vendors

Featured Vendors Near You

Related Photos
Related Forums
What could be more fun than telling your friends and family that you made everything at your wedding yourself? Well, an entire Do it Yourself wedding ...

might be going a bit overboard, but Project Wedding has tons of DIY wedding ideas for you to implement for your big day.

Whether you can’t cut a straight line or you’re the next Martha Stewart, we have DIY wedding ideas for every type of bride. From DIY wedding favors to DIY wedding decorations to DIY wedding invitations, if you’re interested in doing it yourself, we can help! With so many unique images of wedding ideas we’ve found, plus all our great photos of real weddings, you’ll find the most DIY wedding ideas here.

From simple wrap and tie wedding favors to more complex origami wedding decorations – if we think you can make it, you’ll find it here. These DIY favors are guaranteed to thrill your guests without emptying your pockets. Even if you’re not very crafty, we still have some fast and easy project ideas that you might like. And if you have creative friends or relatives, chances are they will be more than happy to help you.

DIY weddings are a great way to put a personal touch on all of your wedding details. You can add your initials to your wedding favors, make a candy buffet that complements your wedding colors, or create a masterpiece that looks store bought but cost way less. Whatever your reason for wanting a Do it Yourself wedding, our articles will help make your dreams come to life.

With so many great DIY wedding ideas, all of your family, friends and honored wedding guests are guaranteed to remember how amazingly creative your wedding day was. Now go get crafty!