|
09/04/2009 at 07:16 am
How easy is this! A DIY cupcake stand made from clay pots you can find at craft stores or home improvement places. All directions and pictures from Once Wed.
What You’ll Need: 2 terra cotta saucers (I used a 7” and a 10” saucer, but you can use any size you like) 2 terra cotta rose pots (The pots I used are 5” and 6” high. You can use any size as long as they are taller than the height of your cupcake and frosting.) 2 yards ribbon (or what ever it takes to make it around the circumference of your saucer) Decorative or scrap book paper Acrylic paint Hot glue gun and glue sticks Sponge paint brush Scissors Cupcakes
Instructions: 1. Begin by painting both sides of your terra cotta saucers and only the outside of the terra cotta rose pots with
your acrylic paint and sponge brush (see figure one and two). Paint a second coat if needed. 2. Allow the paint to dry completely. 3. Turn the saucers upside down and glue the bottom of the rose pots to the back side of the saucers using your hot
glue gun. Use a generous amount of glue. (see figure 3) 4. When the glue has dried, turn your cake stands right side up and carefully glue your ribbon to the edge of your
saucers. (see figure 4) 5. Cut two circles out of your paper to line the inside of the saucers. (see figure
5) 6. Stack stands and arrange your cupcakes. For the full article please visit this page
on OnceWed. |
|
09/04/2009 at 07:42 am
|
|
09/19/2009 at 10:44 am
|
|
09/19/2009 at 05:59 pm
|
|
11/18/2009 at 06:53 pm
|
